797018
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
08
GB
F
E
4. When the action is completed, the RDS icon will appear
on the LCD display indicating the radio time is RDS
clock time. The radio clock time will be valid for 2 days
each time the rad io time is synchronized with RDS CT.
1. If the clock time from your local RDS station is not
correct, you should consider disabling the RDS CT
function.
2. Please note that at times the RDS signal may
broadcast the wrong time, this is the fault of the radio
station, not your radio.
NOTE
Setting the alarm clock
There are two alarms which can each be set to wake you
to AM / FM radio, or buzzer alarm. The alarms may be
set while the unit is off or on. Ensure that the time is set
correctly before setting the alarms.
If no buttons are pressed for 10 seconds, the radio will
exit the alarm setup.
NOTE
1. Press and hold any of the Alarm button for more than 5
seconds until the Alarm 1 icon or Alarm 2 icon flashes
on the display followed by two beeps. You've now
entered the alarm setting (e.g. Alarm 1 button to enter
the alarm 1 setting).
2. The hour setting of alarm 1, for example, will begin
to flash. Rotate the Tuning control knob to select the
required alarm hour, and press and release the Tuning
control button to confirm the setting. Rotate the Tuning
control knob to select the required alarm minute, and
press and release the Tuning control button to confirm
the setting.
3. Then the display will show the frequency options for the
alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Rotate the Tuning control knob to choose the desired
frequency for the alarm. Press and release the Tuning
control button to confirm the setting.
4. Rotate the Tuning control knob to choose the desired
source for the alarm (Buzzer, FM or AM). Press and
release the Tuning control button to confirm the setting.
If setting alarm to Buzzer proceed to step 5.
When selecting the alarm for FM or AM, rotate the
Tuning control knob to choose your required wake-up
station or press and release the desired Preset button
(1-5). Then press and release the Tuning control button
to confirm your selection.
5. Rotate the Tuning control knob to choose the required
sound level for the alarm. Press and release the Tuning
control button to confirm the setting.
6. The alarm has now been set. The Alarm 1 icon (or
Alarm 2 icon) will show on the display.
The alarm radio can only be activated when the unit
is powered with the AC adaptor. If not (i.e. your radio
is disconnected from an AC adaptor, but inserted with
back up batteries), buzzer alarm (with no Humane
Waking System) will be activated instead.
NOTE
7. To view the status of the alarm setting, press and
release the Alarm 1 (or Alarm2) button. To quickly
change the OFF / DAILY (for example) status of the
alarm, press and hold the corresponding alarm button
(i.e. Alarm 1 or Alarm 2 button) for 2 seconds until you
hear a beep, the “OFF” or “DAILY” (for example) will
show on the display.
When the alarm sounds
When the buzzer alarm activates, the alarm will start softly
and gradually increase in level (Humane Wake System).
It will sound for 1 minute and silence for 1 minute in
repetition for 60 minutes unless cancelled. The radio will
sound non-stop at the selected time for up to 60 minutes
for other alarm types.
When the radio alarm is activated, the alarm will go off in
Humane Waking System. It will increase its volume from 0
to your set volume.
To deactivate a sounding alarm, press the Standby (main
power) button to cancel a sounding alarm.
Disabling / cancelling alarms
To cancel the alarm setting before the alarm sounds, press
and hold the corresponding alarm button (i.e. alarm 1 or
alarm 2 button) until a beep sounds and “OFF” appears
on the display. The alarm indicator will disappear from the
screen and the chosen alarm will now be disabled.
Snooze
1. When the alarm sounds, press any button other than
the Standby (main power) button will silence the alarm
for 5 minutes. “SNOOZE” will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Info / Menu button to enter the menu
setting.
3. Rotate the Tuning control knob until “SNOOZE X”
appears on the display, then press and release the
Tuning control button to enter the setting. Rotate the
Tuning control knob to adjust the silence time from 5,
10, 15 and 20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is suspended,
press and release the Standby (main power) button.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 15, 30, 45, 60, 90 or 120 minutes.
1. Press and hold the Standby (main power) button to
enter the Sleep Timer setting.“SLEEP XX” will show on
the display.
2. Keep pressing the Standby (main power) button and
the Sleep Timer options will start switching on the
display. Stop until the required Sleep Timer setting
appears on the display. The setting will be saved and
the LCD will return to normal display.
3. Your radio will turn off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon will
show on the display indicating an active Sleep Timer.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sangean RCR-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sangean RCR-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info