567084
11
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Simply pressing one button. To program the Direct button recall your favorite station, press MEMO
button (16) [M] and then press PRIORITY button (13) [ ].
ALARM FUNCTION
The ATS-909 has three timer circuits as indicated by TIMER button (6) [1] [2] [3]. The alarm function
may be set with the power on or off. To set the alarm tune to the station you would like to be awaken to.
Press MEMO button [16]. Press one of the three timer buttons (6) [1] [2] [3]. The timer and button
number will flash in the LCD display along with the icon indicating radio or buzzer for approximately 12
seconds. Select radio or buzzer by pressing MODE button (7). While flashing continues set time or
alarm to come on using the numerical keys (19) on the key pad. When complete press ENTER key (17).
Repeat steps for other timers.
In addition to being able to set 3 different wake up times it is possible to set each wake up time to a
different frequency.
SETTING THE SLEEP TIMER (AUTO SHUT-OFF)
The sleep timer allows the user to set the auto-shut off in 10 minutes decrements from 90 minutes to 10
minutes. To set auto shut-off press POWER/SLEEP button [1] and hold down. The display will show a
bed symbol and a series of switch off times descending in time as long as the POWER/SLEEP button is
depressed. Release button when shut off time desired is reached. Radio will remain on for selected
length of time.
RDS FUNCTION
The ATS-909 incorporates circuitry to receive FM stations transmitting an RDS (Radio Data System)
signal. When receiving an RDS station the display will show the station call letters and if the RDS
station is also transmitting a CT function (clock time) it will automatically correct the time every minute. It
is important to make sure that the Home Time (as described under "SETTING THE CLOCK (REAL
TIME)" is set correctly. In addition if your time zone is operating under Daylight Savings Time make sure
the DST (Daylight Savings Time) button [2] is depressed. For the time function to operate the following
conditions must exist:
a: TIME SET switch button (32) must be set in the AUTO position.
b: Radio must be on.
c: Radio must be tuned to an FM station transmitting RDS CT function.
SINGLE SIDE BAND (SSB) RECEPTION
SSB is very popular among ham and business radio users because of its signal intelligibility superiority.
Many amateurs who operate SSB and transmit below 10 MH generally use the lower side band (LSB)
while amateur and commercial stations transmitting above 10 MH generally use the USB. Your ATS-
909 is equipped to receive all USB and LSB transmissions. To receive SSB stations:
1] Turn the set on.
2] Extend the telescoping antenna full length and position upright or use external antenna.
3] Set the RF Gain Control [25] to maximum.
4] Select the SW band as described in "SELECTING A SW BAND"
5] If frequency of SSB station sought is known enter the frequency in accordance with earlier
z
z
10
1
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sangean ATS-909 W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sangean ATS-909 W in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info