53
TEXT MESSAGING
[L VERSION ONLY]
This feature allows two digital keyset users to respond to each other with
preprogrammed messages. After receiving an Off Hook Voice
Announcement or Station Camp-On, you may respond with a text message
while continuing to talk and listen to your outside party. The other station
can view this message and take the appropriate action or respond back with
another text message.
There are 25 messages (01-25) stored in system memory that can be sent
to another display keyset. Only the display keysets that are allowed in sys-
tem programming (MMC 318) will receive the TMSG softkey in the display
and use this feature.
Familiarization with the two digit message numbers you will use the most will
make this procedure quick and easy. However if you do not know them, use
the UP/DOWN key to scroll to the desired message, then press SEND.
The basics steps in text messaging are:
1. Press TMSG soft key to begin text messaging.
2. Dial the 2 digit number for the desired message.
3. Confirm this is the intended message then press SEND.
4. Wait for a reply from the other station (steps 1, 2 & 3)
5. When any station presses EXIT the displays at both stations return to
their previous call progress condition.
At all times after step 1 you can talk and listen to your caller while repeating
steps 2.
The example on the following page will better demonstrate how to use Text
Messaging. In this example station 205 is making an off hook voice
announcement to station 205 who after hearing the announcement will
respond with a text message.
STATION 201: LINDA STATION 205: JOHN
received a call on line 702 is talking on line 701
Talking on line 702
702: 01:15 701: 05:25
CONF PAGE MUTE
Press TRANSFER
Transfer:
RETURN
PSMG . . . . . . .Programmed Message 01–30
RP . . . . . . . . . .Ring Plan . . . . . . . . . . .(1–6), HOLD for none
SG . . . . . . . . . .Station Group . . . . . . .500 or 5000 through 549 or 5049
SPD . . . . . . . .Speed Dialing . . . . . . .00–49, 500–999
DIR . . . . . . . . .Directory . . . . . . . . . . .PERS (1), SYS (2) or STN (3)
VT . . . . . . . . . .Voice Mail Transfer . . .Voice Mail Group (501–549)
NOTE: Confirm that the cursor is placed correctly before you enter the ex-
tender.
LCR WITH CLEAR
When you are making an outside call using LCR and dial an incorrect digit,
you can press the CLEAR soft key to reenter the telephone number. You do
not need to redial 9 to reaccess LCR.
BACKSPACE WITH LCR
If you misdial while using LCR, you can delete digits shown in the display by
pressing the BSPC soft key as many times as necessary.
ADVANCED PROGRAMMED
MESSAGES
This is an advanced form of the PROGRAMMED MESSAGE feature with
the ability to add an extender such as date or time. Example [RETURN
ON:Dec/24] or [RETURN AT:03:30p]. These are messages 26-30 and can
be used in addition to 01-25 described in PAGING AND MESSAGING sec-
tion in this guide.
• With the handset on-hook, press TRANSFER and then dial 115.
• Dial any message code (01-30) listed on the back of this user guide or
press UP or DOWN to select any message you desire. Messages 26-30
are used for inserting a date or time. If you select one of these mes-
sages (26-30), your phone will wait for five more digits to be entered. At
this point you will enter two digits for hour or month (01-23) and two dig-
its for day or minutes (00-59). The fifth and final digit to be entered is a
✱ located on your dial pad to select “a” for A.M., “p” for P.M. or “/” for
date. Depressing the ✱ button on your dial pad will scroll through these
three options (“a”, “p”, and “/”).
• Press TRANSFER to exit and store your selection.
To cancel any of these messages:
• With the handset on-hook, dial 48 plus 00, OR
• With the handset on-hook press TRANSFER and then dial 115 plus 00
and TRANSFER again to exit.
52
