667846
5
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
15 16
17 18
Flash Power can be adjusted manually. The photographer can set the desired
exposure manually by the most appropriate power in combination with the
aperture value set on the camera. 22 different power, from full power to 1/128
power, by every 1/3 stops are available.
Set the camera mode, to or on your camera.
Set the mode of MG8000. From the 6 icons screen, select
M / Av and set .
Select M and set .
Select your desired power and set .
The camera-subject distance for the most proper exposure
is determined by the film speed (ISO) and the F stop set
on the camera.
This distance is shown in the Manual function screen.
The film speed information (ISO) is automatically
transferred from the camera.
The F. stop you set on the camera is to be set maunally on
the flash unit, too.
To get the camera-subject distance on the display screen,
F. Stop setting is required.
Press set for 2 seconds, the screen goes to the
Advanced Function page.
Move cursor to F.Stop line and continuously select
the same F.Stop number you set on your camera.
Press on/off switch to lock the value. (Press it again to
release the lock)
The distance is automatically followed by changing the
focal length and ISO sensitivity level on the camera, or
selecting another power level.
Manual Power Opertion
As for the non-dedicated or traditional type film
cameras, the film speed (ISO) information is not
transferred from the camera.
In this case, the film speed (ISO) is to be set on the
flash unit to indicate the camera-subject distance.
Move cursor to ISO line at Advanced function page
and continuously select the ISO value to which you set camera.
Press the set button. Or wait for 8 seconds to return to M function
screen.
Set
Set
Set
Set
The reflector position of MG8000 can be set manually.
To get an illumination area different from the picture frame either wider or
narrower field, manual zoom setting makes sense. When using MG8000 with
non-dedicated camera or traditional film type camera, the reflector position of
MG8000 does not respond to the camera lens movement. In this case, use this
Manual Zoom Setting.
Manual Zoom Setting
Set
Set
The mode to be set on the camera: or
2nd (rear) curtain synchronization
Flash usually synchronizes to the camera shutter when it opens (1st curtain
sync.). For the slow shutter photography, MG8000 can be set the flash timing just
before the shutter closes (2nd curtain sync.). By using this function, a moving
subject is imaged with such moving marks behind. Refer the camera owners
manual for details.
On the TTL function screen, press the button for 2 seconds.
TTL Advance page appears.
Select ‘Curtain’ by button.
Select ‘2nd’ for 2nd Curtain Sync by button.
Press the button or wait for 8 seconds to return to the TTL function screen.
A symbol ‘>>>’ appears at the upper right hand corner for 2nd Curtain Sync,
while no symbol appears for normal flash sync. (1st curtain)
Set
Hi-Speed Sync
The flash of MG8000 can be set for camera with higher shutter speeds up to
1/8000 second.
On the TTL function screen, press the button
for 2 seconds.
TTL Advance page appears.
Select ‘Hi-Speed’ by button.
Select ‘On’ for High-Speed Sync by button.
Press the button or wait for 8 seconds to return to the TTL function
screen.
A symbol appears at the upper right hand corner for High-Speed Sync
Flash Exposure Bracketing (FEB)
MG8000 supports exposure bracketing function at every 0.3Ev increment
within the range of 3Ev. You will get 3 continuous flash pictures in different
exposure effects on each frame. Set the camera shutter for drive mode and
number of picture frame is to be set on the camera. Refer the camera owners
manual for details.
On the TTL function screen, press the button for 2 seconds.
TTL Advance page appears.
Select ‘Bracketing’ by button.
Select ‘On’ for Bracketing by button.
Select your favorite EV step from 0.3 to 3 for
Bracketing by button.
Press the button or wait for 8 seconds to return to the TTL function
screen.
A ‘BKT1’ symbol appears at the upper right hand corner for Bracketing.
Remark:
IMAGE ZONE ( Portrait, Landscape, Close-up,
Sports, Night Portrait) When setting the camera mode to any of
those image zone, MG8000 is automatically set at TTL-AUTO function
mode. In this mode, TTL exposure level compensation can not be
adjusted. All other advance functions are available.
Set
Set
H
Set
On the TTL function screen, press the set button for 2
seconds.
TTL Advance page appears.
Select M.Zoom and continuously select on and
set or wait for 8 seconds to returns to the TTL function
screen.
Be aware that now your MG8000 will not adjust the zoom
setting automatically when you change the focal length of your
lens until you will have returned to “M.Zoom Off”on the TTL
Advanced page.
Set
Set
v
v
Set
9.0
Full Auto,
K
1
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung UE49MU6279 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung UE49MU6279 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Samsung UE49MU6279

Samsung UE49MU6279 Gebruiksaanwijzing - Nederlands - 158 pagina's

Samsung UE49MU6279 Gebruiksaanwijzing - Nederlands - 157 pagina's

Samsung UE49MU6279 Gebruiksaanwijzing - Deutsch - 158 pagina's

Samsung UE49MU6279 Gebruiksaanwijzing - Deutsch - 157 pagina's

Samsung UE49MU6279 Gebruiksaanwijzing - English - 158 pagina's

Samsung UE49MU6279 Gebruiksaanwijzing - Français - 157 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info