CAUTION
Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive
vibration or magnetic interference.
Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high
humidity. Doing so may cause fire or electric shock.
If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or
damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD
image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
When using the camera outdoors, moisture may occur inside the camera due to temperature difference
between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor
use, use the camera with built-in fan and heater.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
LAN Ethernet cable should not be extended to outside of building.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
