Back Controls
You must have more than one camera configured on the system when using the functions that requires more than one camera.
* Not included
Side Controls
Using this feature will disable the LCD screen. The LCD screen will turn back on when the A/V cable is disconnected.
n
`
`
n
`
Talk Button
Press down and hold the button to talk back to the camera
currently being displayed on the LCD screen.
Receiver ON and low battery indication
When the Unit is turned on the LED is solid green.
If the LED blinks then the battery charge is low. Please connect
to the AC power adapter to charge.
Charging Indication LED
A red LED shows battery is charging.
A Green LED shows battery is fully charged.
DC 5V Power Input
Connect the included AC power adapter to power and/or
charge the receiver battery (when the receiver is not placed in
the optional Charge cradle).
A/V Out Port
Connect the included A/V cable to view video from a TV or
monitor, or record transmissions on a DVD recorder/VCR.
Power Slide Switch
Slide the switch to ON or OFF position to switch on/off the
receiver.
Micro SD Card Compartment
Insert Micro SD card for video recording capavility. (Not included)
A/M record
Press to auto record or manual record during monitoring.
Only available when the Micro SD card is inserted.*
REC [A] : Start recording when an alarm is detected.
REC [M] : Start recording when the button is pressed.
Night Light Button
Press to remotely turn on/off the night light on the camera
(for the camera currently being displayed on the LCD screen).
When the night light is on, an indication icon will be
displayed on the LCD screen.
Antenna Locking Switch
Slide the switch to unlocking position, the receiver antenna
will pop up.
Then you can adjust the antenna for better signal reception.
Speaker
Produces the sound transmitted from the camera(s).
Belt Clip
When you carry the receiver, use the belt hanger to hold the
receiver onto your belt.
Kick Stand
Use to hold the receiver onto a table.
