836303
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
English - 20
What is the difference between BT READY and BT
PAIRING ?
BT READY : In this mode, you can connect a previously connected TV
or mobile device with the soundbar.
BT PAIRING : In this mode, you can connect a new device to the
soundbar.
(Press the Pair button on the Remote Control or press and hold
the ( Microphone ) button or ( Source ) button at the top of the
soundbar for 3 seconds or longer while the soundbar is in BT mode.)
Precautions when connecting to Bluetooth
Position the device you are connecting to the soundbar by
Bluetooth within 1 meter.
If prompted for a PIN code when connecting to a Bluetooth device,
enter <0000>.
The soundbar will automatically turn off after 18 minutes of
inactivity in Standby mode.
The soundbar may have difficulty scanning for available Bluetooth
devices or connecting properly under the following conditions:
- If there are nearby electronic devices or equipment causing
radio interference.
- If multiple Bluetooth devices are simultaneously paired with the
soundbar.
- If the Bluetooth device is turned off, out of range, or
experiencing a malfunction.
Electronic devices may cause radio interference. Keep any device
that generates electromagnetic waves away from the soundbar.
(e.g., microwave oven, wireless LAN, etc.)
The soundbar supports SBC data (44.1kHz, 48kHz).
Only connect to Bluetooth devices that support A2DP (AV).
When connecting the soundbar to a Bluetooth device, keep them as
close to each other as possible.
The greater the distance between the soundbar and Bluetooth
device, the lower the audio quality will be.
The Bluetooth connection may be lost if the devices are out of
range.
The Bluetooth connection may not work properly in areas with
weak signal reception.
A Bluetooth device may experience noise or malfunction under the
following conditions:
- If a part of your body comes in contact with the signal
transceiver of the Bluetooth device or soundbar
- In corners or when there is an obstacle in proximity, such as a
wall or partition, where electrical changes may occur.
- When exposed to radio interferences by other products
operating on the same frequency ranges, such as medical
equipment, microwave ovens, and wireless LAN devices.
- Obstacles such as doors and walls may degrade audio quality
even if the devices are within operational range.
Note that your soundbar can't be paired with other Bluetooth
devices while Bluetooth audio is being played.
This wireless device may cause electrical interference during
operation.
Disconnecting a connected Bluetooth device
Refer to the Bluetooth device's user manual for more details.
When the soundbar is disconnected from the Bluetooth device, BT
DISCONNECTED will appear on the front display.
Disconnecting the soundbar from the Bluetooth device
Press the ( Multi ) button or ( Source ) button at the top of the
soundbar or ( Source ) button on the remote control and switch to
any other mode besides BT .
Ending the connection may take a few seconds as the Bluetooth
device waits for a response from the soundbar. (The disconnection
time may vary, depending on the Bluetooth device.)
When the soundbar is disconnected from the Bluetooth device, BT
DISCONNECTED will appear on the front display.
Connecting by Wi-Fi (Wireless Network)
For Samsung Sound to work properly, a specific or higher version of the
OS is required.
For more information on OS versions, please see the Samsung Sound
App description in the app marketplace for your OS.
1 - Installing app
You can control the soundbar and adjust settings using
the Samsung Sound app.
Download the Samsung Sound app from the App store or
Play store on your mobile device or scan or click the QR
code to download the app.
2 - Registering a device
1. On your mobile device, run the Samsung Sound app.
2. Follow the instructions displayed to register the product to your
mobile device.
- If a pop-up window doesn't appear, go to the app's home screen,
then tap the ( ) button to register the product.
NOTE
You can also register your soundbar to the Samsung Sound app by
scanning the QR code on the soundbar.
If the device isn't found
1. Connect the mobile device to the soundbar by Bluetooth.
2. Tap Connected Devices in the Samsung Sound App.
3. Slide left on the screen to select the soundbar card on your
mobile device. Then, tap Register device to Samsung account to
register the device.
3 - Controlling the Soundbar with Samsung Sound
1. Open the Samsung Sound app on your device, and then select the
soundbar you have registered.
2. The settings menu will appear for the soundbar, and you can adjust
the settings such as Volume , Sound Mode , and Advanced Sound
Settings .
- If a different user wants to control the soundbar, the user can tap
the “ Menu ( ) How to Use > Share control of devices in the
Samsung Sound app on their mobile device.
To change your Wi-Fi (wireless network)
1. On your mobile device (smartphone or tablet), run the Samsung
Sound app.
2. After tapping the soundbar card, tap the ( ) icon.
3. Tap Device settings > Network status > Change Wi-Fi network , then
follow the on-screen instructions.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung HW-Q990H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung HW-Q990H in de taal/talen: Engels als bijlage per email.

De handleiding is 8,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Samsung HW-Q990H

Samsung HW-Q990H Gebruiksaanwijzing - Nederlands - 26 pagina's

Samsung HW-Q990H Gebruiksaanwijzing - Deutsch - 26 pagina's

Samsung HW-Q990H Gebruiksaanwijzing - Français - 26 pagina's

Samsung HW-Q990H Gebruiksaanwijzing - Espanõl - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info