491240
3
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
GB
5
GB
4
USING THE SCALE
TO SWITCH TO ‘SCALE MODE’
TO MEASURE SOLIDS & LIQUIDS
a) Place the weighing platform on the
worksurface, below the display panel, with
the IR sections aligned and unobstructed.
b) If using a bowl,place it on the weighing platform.
c) The action of placing the weighing platform
on the worksurface will usually be sufficient to
switch the display to ‘scale mode’ automatically.
If not, just tap the front edge of the platform
to activate ‘scale mode’ on the display.
d) Always check that the display shows 0 before
weighing. If necessary, press the zero key to
reset the display to 0.
To convert between grams (g) and ounces
(oz): press g-oz.
To measure liquids: press ml-floz.
To convert between millilitres (ml) and fluid
ounces (fl. oz): press ml-floz again.
To switch back to solid (dry) measurement:
press g-oz.
T
O ADD ANDWEIGH
A
UTO SWITCH OFF
To weigh several different ingredients into one
bowl: press zero to reset the display between
each ingredient.
Automatic switch off occurs if the display
shows either 0 or the same weight reading
for 3 minutes. (The backlight switches off after
1 minute).
When the scale switches off, the display will
automatically return to clock mode.
When display is showing time and temperature:
To change between 12 hour and 24 hour display, press g-oz briefly.
To change between °C and °F display, press ml-floz briefly.
To illuminate the display for 10 seconds, press zero briefly.
A
DDITIONAL DISPLAY FUNCTIONS IN CLOCK MODE
For correct operation a clear path is required
between the red lens on the weighing platform
and the red lens on the display panel.To help
achieve this, ensure that the IR sections on both
the display panel and weighing platform are
aligned with each other.
Note: Avoid placing large ‘overhanging’
items on the platform as this may obstruct
the IR signal. Should the IR signal become
obstructed during weighing, the display will
return to ‘clock mode’. Removing the obstruction
promptly will restore the signal.
TAP!
LOW BATTERY WARNING
Replace batteries in scale
(4 x AAA).
Always remove ‘low’
batteries promptly.
Never mix old and
new batteries or different
battery types.
Replace batteries in display
module (3 x AAA).
OVERLOAD WARNING
Total load applied exceeds
max. capacity of scale.
Remove excess load.
ADVICE & CARE
MORE ABOUT LIQUID MEASURES
The aquatronic
TM
is programmed to measure all
water based liquids. In practical terms this
covers almost every liquid used in domestic
cookery including wine, milk, cream etc.
The exception is oil, which is not water based
and would therefore not give such an accurate
measure. (The error would be approx. +10%).
CLEANING
Clean the scale with a slightly damp cloth.
DO NOT immerse the scale in water or use
chemical / abrasive cleaning agents.
All plastic parts should be cleaned immediately
after contact with fats, spices, vinegar and
strongly flavoured / coloured foods. Avoid
contact with acids such as citrus fruits.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Salter 1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Salter 1200 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info