14
1.screw cover 2.self-tapped screw 3.top cover 4.cabinet 5.adjustable leg
6.screw 7.self-tapped screw 8.upper door hinge 9. knob 10.supporter of
top cover 11.door 12.lower door hinge 13.pin 14.adjustable leg
15.screw
1. Remove the screw covers(1) and the self-tapped screws(2), then pull out the
knob(9) and push out the top cover (3) from the supporter of top cover (10).
2. Remove the self-tapped screw(6) ,the screws(7) and the upper door hinge(8),
keep the hinge for later use.
3. Remove the supporter of top cover(10) and pull out the door(11) uprightly from
the lower door hinge(12) .
4. Remove the screws(15) that hold the lower door hinge(12), then remove the
pin(13) and adjustable leg(14) ,then fix them on the other side of the lower door
hinge.
5. Unscrew the adjustable leg(5) on the left side of cabinet and screw it on the
other side .
6. Fix the lower door hinge on the left side of cabinet(4) by tightening the
screws(15). (Showing the assembly instruction of the low door hinge with the door
opening at the right side & left side as the pictures in the page 4)
Hinge on the right side Hinge on the left side
7. Put the door on the lower door hinge(12), keep the door level, then fix door on
the cabinet(4) by fixing the upper door hinge(7)on the left side of top of cabinet,
then fasten the screws(7) on both sides.
8. Fasten the self-tapped screw(6) in the supporter of top cover.
9. Put the top cover(3) on the cabinet(4) and fasten the self-tapped screws(2),
then press the screw covers(1) on the top cover.
10.Plug the knob(9) into the top cover.
Ⅴ.DEFROSTING
For the most efficient operation and minimum energy consumption, defrost the
freezer when the frost on the evaporator is excessive 3 to 4 mm thick. To start
defrosting, unplug the freezer, remove the food and drawers. After the frost or ice
