788844
16
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
8
6. When the appliance has finished charging, remove the mains adapter from
the wall socket and disconnect the USB-C charging cable from the appliance.
The hair straightener is now ready to use. Charging will take approx. 3-4 hours.
When the appliance’s battery is fully charged, you can use it for approx.
20 minutes at the highest temperature setting (220 °C).
During use, the charging indicator light will light up in ...
... white if the battery‘s capacity is above 60 %.
... orange if the battery‘s capacity is above 20 %.
The charging indicator light will flash if the battery’s capacity is below
20 %. This is to indicate that the battery needs recharging.
You can also insert the USB-C charging cable directly into the socket at
the bottom of the appliance if you want to charge the appliance without
using the charging station.
Information on the rechargeable battery
We recommend that you do not recharge the battery after each use.
To maintain the full charging capacity of the battery, only charge it if the
hair straightener has not been used for a longer period of time or if the
battery is almost flat. In such cases it should be recharged fully.
Even if the hair straightener is not used, its battery should be fully
discharged and then recharged 2 times a year.
Charge the battery at a temperature of between +10 °C and +40 °C.
The battery will best hold its charge at room temperature. The lower
the temperature, the shorter the battery life. Very high temperatures
can also negatively affect the battery's capacity.
9
Use
WARNING – risk of fire/burns
The appliance heats up very quickly. It reaches 80 °C within just 30 seconds.
Do not touch the heating plates during use.
The heating plates get very hot. During the heating phase and after use
(and until the plates have cooled sufficiently), either place the appliance
in the charging station or position it in such a way that the heating plates
are not touching any other objects. Ensure that any surface on which the
appliance is placed is heat-resistant.
Switching on the appliance and selecting the temperature setting
1. Slide the On/Off switch to ON.
2. To switch on the appliance, press and hold the Standby button for
approx. 3 seconds. The charging indicator light will light up in white or
orange (see chapter “Charging the battery”).
3. Press the Standby button again briefly to select the desired
temperature setting 160 °C, 180 °C, 200 or 220 °C.
The corresponding temperature indicator light will flash while the
appliance is heating up. As soon as the selected temperature has been
reached, the corresponding indicator light will glow continuously.
Time to heat up Temperature setting
approx. 2 minutes 160 °C
approx. 3 minutes 180 °C
approx. 3.5 minutes 200 °C
approx. 5 minutes 220 °C
117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9)117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9) 09.09.21 09:4709.09.21 09:47
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw SEG HS 923 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van SEG HS 923 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0.71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info