507848
17
Verklein
Vergroot
Pagina terug
1/205
Pagina verder
stones, glass pieces, nails, metallic cable and any
objects that can be projected or get caught during
the cutting.
n Using pruning shears, first prune out branches of a
diameter greater than 27 mm.
n Young buds can be trimmed easily with a scythe
movement; older and bigger hedges can be trimmed
easily with a sawing movement.
n If desired. You can use a string to help cut your
hedge level. Decide how high you want the hedge.
Then ,stretch a piece of string along the hedge at this
height. Trim the hedge just above this guide line of
string. See Figure 4.Trim the side of a hedge so that it
will be slightly narrower at the top. See Figure 5.More
of the hedge will be exposed when shaped this way,
and it will be more uniform.
n If hard objects become jammed in the cutter blade,
switch off the tool immediately, pull out plug first and
only then remove the objects.
n Metal objects such as wire fences and plant supports
can damage the blade. Do not let the cutting blades
come in contact with materials that can not be
trimmed, such as stones or metal.
n Always lay the lead away from the working area.
Always work away from the power socket. For
this reason, decide on the direction of cut before
beginning work.
MAINTENANCE
WARNING
When servicing, use only identical replacement
parts. Use of any other parts may create a
hazard or cause product damage.
WARNING
Always wear safety goggles or safety glasses
with side shields during product operation. If
operation is dusty, also wear a dust mask.
WARNING
Before inspecting, cleaning, or servicing the
machine, disconnect the plug from power source
and wait for all moving parts to stop. Failure to
follow these instruc¬tions can result in serious
personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals
can damage, weaken, or destroy plastic which
may result in serious personal injury.
Only the parts shown on the parts list are intended to
be repaired or replaced by the customer. All other parts
should be replaced at an Authorised Service Center.
WARNING
Blades are sharp. When handling the blade
assembly, wear non-slip, heavy-duty protective
gloves. Do not place your hand or fingers
between blades or in any position where they
could get pinched or cut. NEVER touch blades
or service unit with the power supply connected.
SHARPENING BLADE
n Allow the blades of hedge trimmer to come to a
stop in the position shown in Figure 7. this will allow
clearance for the file between cutter teeth and guard
teeth .
n Clamp blade assembly in a vice and file the exposed
cutting surface of each blade tooth with an 203
mm(8inch) smooth round file,6.4mm(1/4 inch) or
5.6mm(7/32 inch) diameter. be sure to retain the
original angle of tooth when filing .
n Remove the hedge trimmer from the vice, connect
the plug from power source and restart the hedge
trimmer. allow the blades of the hedge trimmer to
come to a stop so that the unsharpened edges of the
cutter blade teeth are exposed.
n Disconnect the plug from hedge trimmer and repeat
the sharpening procedure as described above.
LUBRICATING THE BLADE
For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use.
n Stop the motor and disconnect from power supply.
n Lay the hedge trimmer on a flat surface. Apply light
weight machine oil along the edge of the top blade.
If you will be using the hedge trimmer for an extended
period, it is advisable to oil the blade during use.
See Figure 6
NOTE: Do not oil while the hedge trimmer is running.
n Stop the motor and disconnect from power supply.
n Lubricate the hedge trimmer as described above.
n Reconnect to the power source and resume use.
CLEANING THE HEDGE TRIMMER
n Stop the motor and disconnect from power supply.
n Clean dirt and debris from the body of the hedge
14
English
GB
F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ryobi RHT400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ryobi RHT400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info