557213
28
Verklein
Vergroot
Pagina terug
1/309
Pagina verder
MAINTENANCE
(Recommended spark plug: NGK BR-6HS;
CHAMPION RL86C.)
CLEANING FUEL CUP
( Fig. 21)
Inspect fuel cup (47) for water and dirt.
If dirt or water is present, close the fuel valve and
remove the fuel cup. Using a wrench, grasp the
square on the bottom of the fuel cup and turn
clockwise.
After removing dirt and water, wash the fuel cup with
kerosene or petrol. Reinstall securely to prevent
leakage.
NOZZLE MAINTENANCE
( Fig. 22)
Excessive pump pressure (a pulsing sensation felt while
squeezing the trigger) may be the result of a clogged or
dirty nozzle.
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
Remove the nozzle (11) from the spray wand.
NOTE: Never point the spray wand at your face.
Using the nozzle cleaning tool (15) provided with this
product, free any foreign materials clogging or
restricting the nozzle.
Using a garden hose, flush debris out of nozzle by
back flushing (running the water through the nozzle
backwards or from the outside to the inside).
Reinstall the nozzle then reconnect the nozzle to the
spray wand.
Turn on the water supply and start the engine.
REPLACING THE FUEL HOSE
Replace the fuel hose every 1,000 hours of use. If fuel
leaks from fuel hose, replace the hose immediately.
PUMP MAINTENANCE
We recommend having the pump oil changed every 100
hours to ensure longer life of the machine. This service
should be performed by an authorized service center.
(Recommended pump oil: 15W40)
STORING THE PRESSURE WASHER
It is important to store this product in a frost-free area.
Always empty water from all hoses, the pump, the fuel
tank, and the detergent bucket before storing.
NOTE: Use of a fuel stabilizer and pump saver will give
you better performance and increase the life of the
machine.
Discharge Fuel:
Drain the fuel tank completely. Stored petrol can go stale
in 30 days.
Remove the drain screw from the carburetor float
chamber and discharge fuel.
Engine Oil:
Drain the oil and replace with fresh, clean oil.
Spark Plug:
Disconnect spark plug wire and remove the spark
plug. Pour about a teaspoon of clean, air-cooled,
four-stroke oil through the spark-plug hole into the
combustion chamber.
Leaving the spark plug out, pull the starter cord two or
three times to coat the inside of the cylinder wall.
Inspect the spark plug and clean or replace, as
necessary.
Reinstall the spark plug, but leave the spark plug wire
disconnected.
Air Filter:
Clean the air filter.
Hoses, detergent bucket, and pump:
Flush the injection tube with clean water for 1 - 2
minutes. Remove all hoses. Empty the pump by pulling
on the recoil starter about 6 times. This should remove
most of the liquid from the pump.
PREPARING FOR USE AFTER STORAGE
Pull the recoil starter grip three or four times to clean
oil from the combustion chamber.
Remove spark plug from the cylinder. Wipe oil from
the spark plug and return it to the cylinder.
Reconnect the spark plug wire.
Refuel the machine as described earlier in the
operator’s manual.
20
English
GB
F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG
PPW-3000_25lgs.qxd 3/26/01 11:52 PM Page 20
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ryobi PPW-3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ryobi PPW-3000 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 30,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info