705904
4
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
4
5. Lower the jug onto the motor unit and twist it clockwise to lock it. Your blender will not operate
unless the jug is correctly fitted and locked.
USING
Your blender will automatically switch off after 2 minutes of continuous use.
It is normal for the off (0) button to flash when in standby. However, if the off button flashes very rapidly,
and the unit doesn’t work when any of the buttons are pressed, unplug it from the supply socket then
reconnect it and try again.
1. Remove the lid.
2. Put the ingredients into the jug.
3. Don’t fill past the 1700ml mark. If you do, the contents may force the lid off when you start the motor.
4. Replace the lid. Never operate the appliance without fitting the lid.
5. Fit the cap to the hole in the lid, and turn it anti-clockwise to lock it.
6. Don’t run the appliance without fitting the cap.
7. Press the 1 or 2 button to start your blender.
8. Press the 0 button to stop your blender
9. Alternatively, press the pulse Y button in short bursts until the desired consistency is obtained.
10. To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole, then replace the cap.
When you have finished:
Switch the appliance off (0) and unplug it.
CRUSHED ICE
Before using the appliance to crush ice, make sure it’s clean, and rinse it out thoroughly.
The slightest trace of detergent may affect the taste of the crushed ice, and will flatten any drink to which
it is added.
For best results, full the jug with between 150ml and 500ml of ice cubes.
Put the lid on the blender, then:
1. Press the pulse button Y for a second or two, then release it.
2. Check the results, and adjust.
STORING
1. To reduce the amount of space required to store your blender, place the jug over the motor unit and
the lid over the base of the jug as shown.
2. The power cord can be stored coiled up under the base of the motor unit.
CARE AND MAINTENANCE
Switch the appliance off (0) and unplug it.
3. Wipe the outside of the motor unit with a clean damp cloth.
4. Hand wash the removable parts.
` You may wash these parts in a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes.
The damage should be cosmetic only, and should not affect the operation of the appliance.
BLADE UNIT
You may wish to remove the blade unit for cleaning.
1. Remove the lid.
2. Sit the jug upside down.
3. Unscrew the jug base and lift it off.
4. Carefully, lift the blade unit out of the jug. Handle only the plastic – don’t touch the metal parts.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Russell Hobbs 22990-56 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Russell Hobbs 22990-56 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info