581132
67
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
67
[
C FIT THE BLADE
14 Use the wide blade for large areas, use the narrow blade for smaller areas, or where access is
restricted.
15 Press the latch, push the blade into the support, then release the latch.
C IN USE
16 Apply the detergent to the surface to be cleaned.
17 Wipe or rub the detergent over the surface as you normally would.
18 Press the trigger to run the motor, press again to stop.
19 Use the blade as a squeegee, in slow arcs, like the action of a car windscreen wiper.
20 The water/liquid from the surface being cleaned, will be sucked into the reservoir.
21 When the contents of the reservoir reach the max mark:
a) stop the motor
b) pull the bung away from the reservoir, to expose the drain hole
c) empty the reservoir via the exposed drain hole
d) replace the bung
e) carry on cleaning
22 When you’ve finished, buff the surface with a lint-free cloth.
, If the light starts to blink, it means the battery is getting low – finish the surface youre
working on, and recharge the battery.
•After about 5 minutes, the appliance will shut down.
C AFTER USE
23 Switch the appliance off.
24 Press the latch, and pull the blade into the support
25 Squeeze the latches on either side of the support, and lift it off the motor unit.
26 Lift the reservoir off the motor unit.
C CARE AND MAINTENANCE
27 Empty the reservoir and rinse it out.
28 Rinse the blade(s) under a running tap.
29 Wipe all surfaces with a clean damp cloth.
30 Let the reservoir and blade(s) air dry before reassembling the appliance.
C REASSEMBLY
31 Fit the reservoir into the motor unit.
32 Fit the support to the combined motor unit/reservoir.
H DISPOSAL
33 Sadly, nothing lasts forever, and the day will come when your appliance comes to the end of
its natural life.
34 The appliance contains a battery, which must be removed from the appliance, and recycled,
or disposed of in an environmentally friendly way.
35 Your local authority should have a centre which accepts such waste for recycling.
36 To remove the battery (see back page):
1 Disassemble the appliance.
2 Unscrew the 4 screws holding the motor unit together, and split the casing.
instructions
diagrams
1 narrow blade
2 wide blade
3 latch
4 support
5 bung
6 reservoir
7 trigger
8 handle
9 light
10 power inlet
11 connector
12 motor unit
= screw
X battery
< cut here
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Russell Hobbs 21800-56 CLEAN CLEAR PRO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Russell Hobbs 21800-56 CLEAN CLEAR PRO in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info