377190
3
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
3
6 Check the lid is closed, or the kettle won’t switch off when it boils.
switching on
7 Plug the stand into the wall socket.
8 Put the kettle on the stand – take care not to spill.
9 Press and release the 2 button. “100” will flash on the display.
10 The kettle will start to heat up.
boil
11 If you want to boil the water, do nothing.
12 When the water boils, the element will switch off, and the display will stop flashing.
13 After about a minute, the display will switch off.
variable temperature
14 If you want to heat the water to a different temperature, use the - and + buttons to change
the display from 100 (boil) to the temperature you want.
15 The temperatures available are: 100 (boil), 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, and 40 (that’s
°C).
16 The display will flash while the water is heating, then stop flashing to show that it has reached
the set temperature.
17 After about a minute, the display will switch off.
changing temperature
18 When the kettle has reached the set temperature, you can’t reduce the temperature setting
on the display till the water has cooled down.
19 If you get the temperature wrong, and want to change it:
either pour the hot water away, and refill with cold water
or wait till the kettle cools down (it’ll cool a bit faster if you open the lid)
keep warm
20 If you want the kettle to keep the water at the set temperature, press and release the 9
button.
, This function only works at the 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, and 40 settings.
21 A dot will appear on the bottom right of the display to show that the keep warm function is
operating.
22 The element will switch on intermittently, to keep the water hot.
23 When it’s heating, the display will flash. The flashing will stop when the water again reaches
the set temperature.
25 After about an hour, the appliance will switch itself off.
25 To switch it on again, press 2.
26 To cancel the keep warm function, press and release the 9 button again – the dot will
disappear.
, Keep an eye on the water level – don’t let the level get below 2 cups.
switching off
27 To switch off manually, press 2.
28 This will switch off the element and the display, and put the kettle into standby mode.
29 To save electricity, unplug the stand.
instructions
drawings
1 hooks
2 filter (rear)
3 hook
4 holes (inside spout)
5 lid
6 lid release button
7 spout
8 handle
9 water level window
10 connectors
11 stand
12 display
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Russell Hobbs 15066 therma select bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Russell Hobbs 15066 therma select in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info