switching off
43 The coffee maker does not switch itself off – you must do this manually.
44 Press the Y button if you’re using beans, press the / button if you’re using ground coffee.
45 The light next to the button will go out.
46 Unplug, and let the coffee maker and carafe cool down fully before cleaning, or for about 10
minutes before refilling.
caution Don’t lift the reservoir lid till the coffee maker has cooled – escaping steam may create
a scald hazard.
a quick cup
47 If you want a quick cup of coffee before the brewing cycle has finished:
48 You may remove the carafe at any time. The non-drip valve will prevent coffee dripping on to
the hotplate.
49 To prevent the filter holder overflowing, replace the carafe on the hotplate within about 20
seconds. This may not sound much, but you’ll find it’s more than enough time to pour a
couple of cups of coffee.
50 Replacing the carafe on the hotplate opens the non-drip valve, to let the coffee flow again.
brew strength 2-4
51 Use this feature if you’re brewing less than 6 cups of coffee. It slows the brewing process, so
your coffee will have the same strength as coffee from a full carafe.
52 The brew strength feature will only work if the number of cups is set to 2 or 4.
53 Press the 2-4 button to activate the brew strength feature, the 2-4 icon will show up on the
display.
coffee later
54 Set the clock to the correct time:
a) Press and release the h button until the correct hour is shown.
b) Press and release the min button until the correct minute is shown.
c) It’s a 24 hour clock.
d) If you overshoot, you can’t step back. Either go right round (24 hours or 60 minutes), or
unplug the coffee maker, to reset the display to 12:00.
e) The clock will retain its settings until the coffee maker is unplugged. It will reset to 12:00
next time you plug it in.
55 Set the timer to the time you want to start brewing.
a) Press the T button and hold it for 3 seconds.
b) The T light will flash.
c) Release the T button.
d) Press and release the h button until the correct hour is shown.
e) Press and release the min button until the correct minute is shown.
f) Use the e f g button to select the coffee strength e = light, f = medium, g = dark.
g) If you’re using coffee beans, use the 2-10 button to set the number of cups you want.
h) If you’re making less than 6 cups of coffee, press the 2-4 button, to turn the brew strength
feature on.
i) The brew strength feature will only work if the number of cups is set to 2 or 4.
j) If you’re using ground coffee, press and release the / button, otherwise the machine will
assume you’re using beans.
k) If you don’t press all the buttons within 10 seconds, the coffee maker will revert to
“normal”, and the time will show.
l) You’ll have to press the T button, and start again.
, You have now set the timer to the time you want to start brewing, and you have set the clock
to the correct time. You have not turned the timer function on.
