509658
91
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
91
instructions
18 Use the kettle only with the stand supplied (and vice versa).
19 Don’t use the appliance if it’s damaged or malfunctions.
20 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
touch controls
•You don’t need to press the buttons hard – a light touch is enough.
•In some cases, it may detect your finger before it actually touches the button.
sleep mode
•If the appliance is inactive, and you don’t touch the controls for 5 minutes, the lights will go
out, to save electricity.
•To wake the appliance, touch any button.
before using for the first time
Fill to max, boil, discard the water, then rinse. Do this three times, to remove manufacturing
dust, etc.
positioning
1 Put the stand on a stable, level surface. Route the cable so it doesn’t overhang, and can’t be
caught or tripped over.
2 Wind excess cable beneath the stand
filling
caution keep clear, steam may escape from the lid.
3 Remove the kettle from the stand.
4 Press the lid release button to open the lid.
5 Fill with at least 2 cups of water, but not above max.
6 If you overfill, the kettle may spit boiling water.
7 Close the lid, and press down to lock it.
8 Check the lid is closed, or the kettle won’t switch off when it boils.
switching on
9 Plug the stand into the wall socket.
10 Put the kettle on the stand – take care not to spill.
11 The buttons will flash twice, then glow steadily.
variable temperature
12 Touch the button marked with the temperature you want.
13 The temperatures available are: 100 (boil), 95 (coffee), 90, 80, 70, and 60 (that’s °C).
14 The button will flash.
15 The kettle will start to heat up.
pulsing element
16 Initially, you’ll hear the element pulse on, off, and on again, as it works to control the
temperature accurately.
17 When it reaches the set temperature, the button will stop flashing and glow steadily.
18 After 5 minutes, the light will go out, and the appliance will go to sleep.
changing temperature
19 If you get the temperature wrong, and want to change it:
a) touch the correct button
b) the button will flash while the water heats or cools
c) when it reaches the set temperature, the button will stop flashing and glow steadily
, Reducing the temperature may take a long time – you may prefer to pour the hot water away,
and refill with cold water.
91

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Russell Hobbs 14743-56 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Russell Hobbs 14743-56 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info