489891
6
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
PERCUSSION DRILL P850E
(SEE FIGURES IN PAGES 29)
1 ON/OFF switch with electronic control
and adjusting wheel for speed selection
2 Holding button for continuous operation
3 Reversing switch
4 Switching from normal drilling to percus-
sion drilling 5 Mechanical 2-speed selector
Mains cable with patent quick-release lock
7 Lock for mains cable
8 Quick-change chuck 9 Auxiliary handle
1. TECHNICAL DATA
850W
467W
x
x
2
0-1450
0-3460
744
1777
n x 16
13
30
16
8
6,3
43
25
13
12" x 20 UNF
2,20
2. USE
This drill is universally suitable for percussion
drilling in rock, for drilling and as a screwdriver
with wood, metal and plastic and for cutting thre-
ads.
You should use 1st gear of the mechanical
drive when using the device for stirring and
drilling holes with large diameters.
3. SAFETY INSTRUCTIONS AND PREVEN-
TION OF ACCIDENTE
Before operating the machine, please read
through the operating instructions completely, fol-
low the Safety Instructions in this manual as well
as the generai Safety Instructions for Power
Tools in the accompanying booklet.
Caution!
Pay attention to the jamming moment of the
machine, e. g. if the drill jams or if the drill hits
concrete reinforcing steel and jams!
Before fitting tools in the chuck or drill spin-
dle disconnect the machine from the power
supply, or remove the mains cable with patent
quick-release lock (8) from the grip using the
locking device button (7)!
Do not work with materiale which contain
asbestos!
Outside power sockets must be protected
with residual-current-operated circuit-brea-
kers (r.c.c.b.).
Do not drill holes into the housing to label
the machine. The protective insulation will be
bridged. Please use self-adhesive labels.
Always lead cables away towards the back
of the machine.
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
4. DOUBLE INSULATION
Our equipment is designed in accordance with
European regulations (EN standards) for the
utmost safety of the user. Machines with double
insulation always carry the international sym-
bol. The machines do not require earthing. Atwo-
core cable is sufficient.
The machines are interference-suppressed in
accordance with EN 55014.
5. INITIAL OPERATION
Before the first operation check that the mains
voltage corresponds to that given on the machi-
ne nameplate.
6. TRIGGER SWITCH WITH BUTTON FOR
CONTINUOUS OPERATION
The machine is set in operation by pressing in
the handle switch (1). The holding button (2) on
the side of the switch can be pressed for conti
-
nuous operation. To release the continuous ope-
ration merely depress the switch, which makes
the holding button spring back automatically
.
6. ELECTRONIC SPEED CONTROL
This machine has an integrated electronic control
circuit built into the switch. The required speed
may be selected with the adjusting wheel (e.g. for
serial screw drilling or for cutting threads).
The
switch is lockable in every position.
6
English
Input
Output
Electronic control
Rotalion dghtAeft
No. of speed ranges
No-load speed r.p.m.
1st speed
2 nd speed
Load speed r.p.m.
1st speed
2 nd speed
Percusslon rate p.m.
Max. drill dia. into steel mm
Max. drill dia. into wood mm
Max. percussion Ø drill dia into
concrete mm
Max. screwing Ø into wood mm
Max. screwing Ø into sheet metal mm
Collar diameter, mm
Comer measure Ø mm
Chud < dia., mm
Spindle thread
Weight kg
librettoP850E 21-08-2007 9:26 Pagina 6
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rupes P850E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rupes P850E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info