How to Burn a CD Using Roxio Creator Classic ©2005 Olin Library Arc: Technology Center
Revised August 17, 2005 Larkin Dennis & Sarah Bombich
Page 3 of 4 Washington University
Burn the CD
13. You do not need to change the default CD-R drive, Write Speed, or check/uncheck any
options.
14. For maximum compatibility, and the ability to burn additional files to the disc in the future, we
recommend that you leave the Record Method options are they are below, which is the default.
15. After all desired options are selected, press the OK button when you are ready to start
recording. After pressing the OK button, the Record CD Progress window, (shown in Figure 4
on the next page) should pop up. If you have enough space in your blank recording CD, Easy
CD Creator should start its recording process.
Figure 3. Record CD Setup window.
16. The Record CD Progress window (Figure 4) shows the remaining time of each track as well as
the remaining time of the project. When the OK button is grayed out, the disc is still recording.
When the OK button becomes active and the Cancel button is grayed out, the disc is finished
recording.
17. Press OK when the Record CD Progress window shows that the remaining time is 0:00
minutes. The “CD created successfully” message will also be displayed on the Record CD
Progress window when the recording process has completed.