783664
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Introduction
Probe connection
Sound volume control
Bluetooth Setup
How to Change Default Setting
Date Setup
Alarm Pulse Rate Setup
Memories mode –Memory On
Time Setup
Alarm SpO2 Setup
Default Setting
How to measure
Power installation
Name/ Functions of each part
Rossmax Handheld Pulse Oximeter is used to measure oxygen saturation in blood (SpO2) and
pulse rate, also to issue warnings immediately. It is a non-invasive device intended for spot-check
of adults, child, and infants with corresponding probe applied at home, hospital and clinics.
Attention: Consult the accompanying documents. Please read this manual carefully before
use. Please be sure to keep this manual.
Rossmax PA100/PB100/PC100/PD100/PF1000 or compatible probe is used. (Please install carefully.)
Caution: It may damage the efficiency of the device if not apply with a Rossmax compatible probe.
Press the button to control the
sound volume.
for loud volume.
for silence.
Adjust the bluetooth setting by press
the button
Press the button to enter the “Settings” mode and press / to scroll through option.
Press button to select desired option.
To exit setting, select “ Back/Exit” or wait for 30 second.
Press the button and / button to highlight “Date” option, and then press the
button to select the option.
Entry “Settings Date” mode, press the / button to highlight the desired option and press
the button to select the option.
Press the / button to change the value; press the button to save the desired value.
Press the / button to highlight another option or select “Back/Exit” to return.
Adjustment Range: 180, 175, 170 … 50, 45, 40.
The Unit of Adjustment: 5 BPM / per unit
Press the button and / button to highlight “Alarm PR” option, and then press the
button to select the option.
Entry Alarm PR” mode, press the / button to highlight the desired option and press the
button to select the option.
Press the / button to change the value; press the button to save the desired value.
Press the / button to highlight another option or select “Back/Exit” to return.
Press the button and / button to highlight “Memory” option, and then press the
button to select the option.
Entry “Memory Mode”, press the / button to highlight “Memory Ooption, and then
press the button to select the “Memory On” option.
Press the / button to highlight another option or select “Back/Exit” to return.
Press the button and / button to highlight “Time” option, and then press the
button to select the option.
Entry Settings Time” mode, press the / button to highlight the desired option and
press the button to select the option.
Press the / button to change the value; press the button to save the desired value.
Press the / button to highlight another option or select “Back/Exit” to return.
Adjustment Range: 96, 95, 94 … 83, 82, 81, 80.
The Unit of Adjustment: 1 % / per unit.
Press the button and / button to highlight Alarm SpO2” option, and then press the
button to select the option.
Entry Alarm SpO2” mode, press the / button to highlight the desired option and press the
button to select the option.
Press the / button to change the value; press the button to save the desired value.
Press the / button to highlight another option or select “Back/Exit” to return.
1. Press the Power On button for 1 second, when the device activates, the beep sound will
last for 2 second.
Note: After the device activates, the software version will pop up directly. For first time activates,
please refer to setting instruction.
2. Information of software version appears; insert one finger to probe, nail side up, for self-test.
Note: The device will turn itself off automatically after 1-minutes idling with two beep sounded.
3. The pulse strength shows “ , pulse oximeter begins its measurement.
Note: The heartbeat is sounded though the buzzer. If need to become silence mode, press the
sound button and the LCD screen will have the sound icon shown. If need the
heartbeat sound, press the sound button to exit.
Notes: 1. Don’t remove your finger until the measurement is completed.
2. Any other problems or unrecognized icon, please refer to trouble shooting.
Power can be supplied either by batteries or AC power cable.
AC power cable:
Plug AC power cable into AC power source and printout socket. Icon as ” show on the display.
Note: Once AC power is on, the power supply of the device is switched to AC power. Once AC
power is off, the power supply of the device is switched to battery power.
Batteries:
1. Use thumb to slide battery cover out.
2. Insert or replace 4 “AA” batteries according to the (+/-) polarity.
Caution: Need to replace when the batteries icon “ ” is blinking on display/ while pressed the
function button and nothing appears on display.
Caution: Batteries may leak or explode if used or disposed of improperly. Remove batteries if the
device will be stored for long time. Do not use different types or brand of batteries at the
same time.
No. Item Purpose
1 Sound icon loud volume / silence
2 SpO2 icon
SpO2 real-time value
3 Pulse Rate
Pulse rate real-time value
/
4 Pulse strength
5 Date/Time Show the Date (MM/DD/YYYY) / Time
6 Power status icon
Battery: Full batteries / Critically Low-Battery
AC Power: AC power on
7 Alarm icon Alarm pause for 2 minutes
8 Bluetooth icon
9 Memory icon Collection of Memories Up to 999 memories
10 Bluetooth button Press to turn on / off the Bluetooth function
11 Sound button Press to turn on / off the heartbeat sound
12 UP/DOWN button Press to scroll options and change value
13 SET button Press to adjust default setting / Press to select the option
14 Alarm button Press to pause alarm. To turn off alarm permanently, please entry
“Settings” mode to set up.
15 Power button Press to power on/off
16 it’s for AC Adaptor.
Date: 2018/01/01 Alarm PR: 100 High / 60 Low Alarm SpO2: 86%
Time: 00:00:00 Memory: OFF
Memories mode- Data History
Press the button and / button to highlight “Memory” option, and then press the
button to select the option.
Entry “Memory Mode”, press the / button to highlight Date History” option, and then
press the button to select the option.
Loud volume
Wireless o
Silence
Wireless on
Settings
Date
Time
Alarm SpO
Alarm PR
Memory
Exit
2
Settings
Date
Time
Alarm SpO
Alarm PR
Memory
Exit
2
Alarm PR
Back
100
60
High
Low
Alarm On
Alarm PR
100
60
High
Low
Back
Alarm On
Alarm PR
1
Back
Ala
Alarm PR
1
Back
Al
Settings
Date
Time
Alarm SpO
Alarm PR
Memory
Exit
2
Settings
Date
Time
Alarm SpO
Alarm PR
Memory
Exit
2
Alarm PR
Back
100
60
Hig
Low
Alarm On
Alarm PR
100
60
Hig
Low
Back
Alarm On
or
96
95
94
:
:
82
81
80
start data
transmission
for a few secs.
180
175
170
:
:
50
45
40
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rossmax SA310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rossmax SA310 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info