714314
30
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
30
Bag loses its vacuum after sealing
Wrinkles, crumbs, grease or humidity can cause leaky spots at the sealing seam. Reopen the bag, clean the upper
part of the bag inside as well as the sealing bar. Then seal again. In case of very moist food it is recommended to
place a second sealing seam above the first one.
Check the bag for damage or holes. Padding out sharp edges of the contents using kitchen paper is recommended.
Appliance does not create a complete vacuum inside an “Executive” container or with an
universal lid
Check if one end of the connection hose is positioned into the hose port of the appliance and the other end into the
knob of the container’s lid.
Do not fill the container completely but leave a space above of at least 3 cm.
Remember that liquids must be allowed to cool (in the fridge to be sure) before being vacuum-sealed.
Check if the upper rim of the container or jar as well as the seal of the universal lid is undamaged and clean. Clean
the rim and the lid with a tepid moist cloth and start the vacuum sealing process again.
Ensure that the seals of the lids on the container or universal lids fit correctly and are undamaged.
“Executive” containers or universal lids lose their vacuum
Check whether the arrow on the knob of the lid of the container and universal lid were turned to “CLOSED” after
the vacuum sealing process.
Check whether the rim of the container/jar and the seal of the universal lid are undamaged and clean. Clean them
with a moist cloth and start anew vacuum sealing.
Check the right fitting and intactness of all seals in the lids of containers and universal lids.
Make sure that the ring below the knob of the lid of the container/universal lid fits exactly.
Check to see if the arrow on the knob of the lid of the container is turned to “CLOSED” after the vacuuming
process.
Look to see if the ring under the knob of the lid of the container or universal lid is positioned correctly and fits
exactly.
“Family” containers lose their vacuum
Check whether the rim of the container in the wear area is faulty.
See if the seals in the lid of the container fit correctly and are undamaged.
Check if the seal below the “PUSH” knob of the lid of the container is correctly positioned and fits exactly.
Lids, preserving jars and sealings must not show cracks.
Check to see if the seal below the middle knob of the lid of the container is correctly positioned and fits exactly.
Disposal
According to the Waste Electrical and Electronic Equipment Directive, this product must not be disposed of
with your normal domestic waste at the end of its life-span. Therefore, please deliver it at no charge to your
appropriately licensed local collecting facilities (e.g. recycling yard) concerned with the recycling of electrical
and electronic equipment. Please approach your local authorities for how to dispose of the product.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rommelsbacher VAC300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rommelsbacher VAC300 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info