714021
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Switching off with the ON/OFF sensor (1) when the key lock is active
When the key lock is active and the control is switched off by means of the ON/OFF sensor (1), the LED
above the key lock (2) extinguishes. When switching on again, the key lock (2) is active again until it is
deactivated as described above!
5.2 Pot recognition
If there is no or no suitable wok pot on the switched-on cooking zone, there will be no power
transfer. The blinking “ ” indicates that.
If a qualified pot is placed in the cooking zone, the set level will switch on and the cooking level
indication will glow. The energy supply will be cut if the vessel is removed. A blinking “ ”
appears in the cooking level display and the cooking zone is switched off automatically.
Self-help:
Make sure that the used cookware is qualified for induction cooking. Test the magnetizability of
the pot or ask the pot manufacturer.
Note: Small metal objects like forks or spoons as well as pots made of unsuitable material are not
recognised.
5.3. Safety shut-down during permanent activation
If one or more sensors are applied for more than 10 seconds (e. g. by objects or overrun food
on the operation panel) there will be an audible alarm message for 5 seconds and the lightning
symbol shown on the left will appear in the display. Remove the cause in this case and then put
the appliance into operation again.
If the ON/OFF sensor is permanently activated, the appliance will switch off and cannot be
switched on again without remedying the problem!
Self-help: Remove the cause of the permanent activation. After cleaning the sensor panel, the cooking
zone can be put into operation again.
5.4. Multiple activation
If more sensors are applied simultaneously, no function will be carried out.
5.5. Temperature control of the cooking zone
The cooking zone is equipped with a temperature sensor below the glass ceramic plate. The control is
effected in three steps.
If the first (lower) temperature limit at the cooking zone is passed, a possibly active booster function will be
deactivated automatically. The indication P blinks for 3 seconds firstly, afterwards the control sets the
cooking level 9.
If the second (middle) temperature limit at the cooking zone is passed, the control will automatically reduce
the power supply to avoid a further temperature increase. However, the display continuous showing the set
cooking level!
If the third (upper) temperature level is passed, the cooking zone will be automatically switched off. The
error code E2 (excess temperature) appears in the display.
5.6. Operating time limitation
The operating time limitation causes an automatic switch-off of the cooking zone if there has not been any
change of the settings for a certain period. The operating time limitation is depending on the set level (see
chart). After an automatic switch-off, the cooking zone can be switched on again and the maximum
operating time is active again.
However, timer settings have priority to the operating time limitation i. e. the cooking zone is only switched
off after the timer has elapsed and not when the operating time limitation requires that!
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rommelsbacher EBW3208IN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rommelsbacher EBW3208IN in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info