710369
16
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
16
System Settings
Pad Item Value (Bold: default) Explanation
R channel [3] Backspin length
OFF Short
Normal Long
When applying backspin to the jog dial, this setting lets you make backspin continue
longer than the distance that the jog dial actually rotated.
OFF Backspin operation occurs according to the actual distance of rotation.
Short Backspin operation is shorter than with the Normal setting.
Normal Backspin operation occurs longer than the actual distance of rotation.
Long Backspin operation is longer than with the Normal setting.
Backing Up or Restoring Sequencer Data
Backup
Heres how to back up patterns 1–16 and kits (instruments).
1. While holding down the mixer sections SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.
2. On your computer, open the “Roland drive.
3. Open the “BACKUP” folder, and copy all les from dj_prm_kit1.
prm through dj_prm_kit12.prm and dj_prm_ptn1.prm through
dj_prm_ptn16.prm to your computer.
4. When copying is completed, operate your computer to eject
the “Roland” drive.
5. Disconnect the USB cable to power-o the DJ-202.
Restore
Heres how to restore the backed-up sequencer data from your computer to
the DJ-202.
1. While holding down the mixer sections SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.
2. On your computer, open the “Roland drive.
3. Copy the backup les into the “Roland drive’s “RESTORE”
folder.
4. When copying is completed, operate your computer to eject
the “Roland” drive.
5. Press the SEQUENCER section’s [START/STOP] button.
The performance pads blink alternately, and then all performance pads
blink.
NOTE
Never turn o the power while the performance pads are blinking
alternately.
6. Disconnect the USB cable to power-o the DJ-202.
MEMO
Sequencer data is compatible between the DJ-202 and the DJ-505.
If the DJ-505’s sequencer data is restored to the DJ-202, aspects that
cannot be reproduced by the DJ-202 are automatically optimized.
Returning to the Factory Settings (Factory Reset)
The system settings and patterns stored in the DJ-202 can be returned to
their factory-set state (factory reset).
1. While holding down the [LOAD] button in the left side (L
channel) of the browser section, use a USB cable to connect
the DJ-202 to your computer, and continue holding down the
[LOAD] button until the SEQUENCER sections [START/STOP]
button blinks.
* If you decide to cancel the operation, turn o the power.
2. Press the blinking [START/STOP] button.
Factory reset begins.
The MASTER level indicator blinks, and then all buttons and pads are lit.
NOTE
Never turn o the power while the MASTER level indicator is blinking.
3. After the factory reset is complete, disconnect the USB cable to
power-o the DJ-202.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland DJ-202 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland DJ-202 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Roland DJ-202

Roland DJ-202 Gebruiksaanwijzing - Nederlands - 17 pagina's

Roland DJ-202 Gebruiksaanwijzing - Deutsch - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info