709226

Roland BTM-1 Handleiding

1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
Bluetooth Speaker
Owner’s Manual
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet).
After reading, keep the document(s) where it will be available for immediate reference.
Panel Description
1
2
3
4
5
6
7
8
9
10
11
1
[POWER] button/indicator
Power on Hold down the button until the POWER indicator is lit.
Power o
Hold down the button until the POWER indicator blinks
three times.
* The POWER indicator shows the state of the rechargeable battery.
&see “Charging.”
MEMO
The power of this unit automatically turns o if no audio input/
playback for approximately 15 minutes (Auto O function).
* To restore power, turn the power on again.
2
[ ] (Bluetooth) button/indicator
Bluetooth: On
Hold down the button for two seconds.
When the power turns on, the Bluetooth function will
be on.
Bluetooth: O
Hold down the button for two seconds.
indicator blinks three times 0 unlit
3
VOLUME [+] [−] buttons
Adjusts the overall volume.
Playing the Guitar
These controls adjust the sound of the guitar that’s connected to the
INPUT jack.
* Do not charge the unit while a guitar is connected. Noise might be
heard in the audio if you do so.
4
[GAIN] knob
Adjusts the overdrive’s gain (amount of distortion).
5
[TONE] knob
Adjusts the color of the guitar sound.
6
[LEVEL] knob
Adjusts the volume of the guitar sound.
7
[FX] button/indicator
Turns delay on (indicator: lit)/o. Each time you press the button, the
setting alternates on/o (default: o).
Reference gain for overdrive (default: high)
High
Hold down the [FX] button and press the VOLUME [+] button.
FX indicator blinks three times
Low
Hold down the [FX] button and press the VOLUME [−] button.
FX indicator blinks three times
Connectors
* To prevent malfunction and equipment failure, always turn down the
volume, and turn o all the units before making any connections.
8
AUX IN jack
Connect your audio player or audio device.
9
(Phones) jack
Connect your headphones.
* Use headphones that have a 3-pole plug. If you use headphones
that have a 4-pole plug (such as headphones equipped with remote
control), the audio might not play back correctly.
10
INPUT jack
Connect your guitar.
11
CHARGE port
This port is for charging.
Charging
Before using this unit for the rst time, connect the included USB cable
to the rear panel CHARGE connector and charge it.
* Use a standard USB AC adaptor (5 V/2 A or higher is recommended)
for charging.
* Charge the device using the included USB cable. Do not use the
included USB cable with any other device.
AC outlet
USB AC adaptor
(commercially available)
USB cable for charging
(included)
While this unit is in use, the POWER indicator shows the status of the
rechargeable battery.
* If charging is completed when the power is o, the indicator is unlit.
Indicator Explanation
Lit
Remaining battery capacity is more than half, or charging
is complete
Blinking slowly
Charging
Blinking quickly
Charge the unit
Registering a Bluetooth Device (Pairing)
Here’s the procedure for registering this unit with the Bluetooth device
that you want to connect (e.g., a smartphone).
* The following steps are one possible example. For details, refer to the
owner’s manual of your Bluetooth device.
1. With this unit powered-on, hold down the [ ] button until
the
indicator blinks rapidly.
This unit enters pairing mode, and begins pairing.
2. Turn on the Bluetooth function of your Bluetooth device, and
place it near this unit.
Example) In the case of iPhone
3. While the indicator is blinking, select “Roland BTM-1” that
appears in the Bluetooth device screen of your Bluetooth device.
When pairing succeeds, this unit’s
indicator is lit.
Connecting an Already-Paired Bluetooth Device
1. Turn on the power of this unit. If the Bluetooth function is o,
turn on the Bluetooth function.
If an already-paired Bluetooth device whose Bluetooth function is on
is located nearby, it is automatically connected.
When connection succeeds, this unit’s
indicator is lit.
* If you can’t connect, hold down the [
] button until the indicator
blinks, and then select “Roland BTM-1” that appears in the Bluetooth
device screen.
2. To disconnect, hold down the [ ] button for two seconds
to turn o the Bluetooth function, or turn o the Bluetooth
function of the Bluetooth device.
Deleting a Previously-Paired Registration
1. Hold down the [ ] button for seven seconds.
The indicator blinks six times 0 then blinks rapidly; the
registration is deleted.
Playing Back Music
You can play back music by operating your Bluetooth device, and if your
Bluetooth device supports AVRCP, you can also perform operations such
as play/stop from this unit.
Play/pause
Press the [
] button once.
Skip to the next song
Rapidly press the [
] button twice.
Skip to the previous song
Rapidly press the [
] button three times.
Main Specications
Roland BTM-1: Bluetooth Speaker with Guitar Amplier Function
Rated Power Output 4 W + 4 W
Speaker
5 cm (2 inches) x 2
Passive radiator x 2
Bluetooth
Bluetooth
technology
Bluetooth Ver 4.0
Transmitting
power
Specication Power Class 2 (Line of
sight range 10 m (30 ft)
Prole support
A2DP, AVRCP
Codec
SBC (Support to the content
protection of the SCMS-T method)
Connectors
AUX IN jack (Stereo miniature phone type)
(Phones) jack (Stereo miniature phone type)
INPUT jack (1/4-inch phone type)
CHARGE port (USB micro-B type)
Power Supply
Lithium-ion battery
Supplied from the CHARGE port
Current Draw Max. 2 A (5 V
)
Continuous
playback time using
the battery
Approx. 6 hours (Audio playback of the Bluetooth
connection)
* These gures will vary depending on the actual
conditions of use.
Dimensions
264 (W) x 78 (D) x100 (H) mm
10-7/16 (W) x 3-1/8 (D) x 3-15/16 (H) inches
Weight 920 g / 2 lbs 1 oz
Accessories
Owner’s Manual
USB cable for charging the BTM-1 (*1)
*1: Use a standard USB AC adaptor (5 V/2 A or higher is
recommended) for charging.
* This document explains the specications of the product at the time that the
document was issued. For the latest information, refer to the Roland website.
Troubleshooting
Problem Items to check Action
POWER indicator does not light
even when you press the [POWER]
button
Did you charge this unit before using it? Charge this unit using the included USB cable.
Bluetooth sound is interrupted /
Noise is heard
Could you be using the unit near a microwave oven
or a wireless device such as a Wi-Fi router?
Move the unit as far as possible away from microwave ovens or
wireless devices such as Wi-Fi routers.
This unit does not appear in the
Bluetooth device list of your
Bluetooth device.
Did pairing occur successfully?
Perform pairing as described in “Registering a Bluetooth Device
(Pairing).”
Can’t connect via Bluetooth
Could this unit and the Bluetooth device be too
far apart?
This unit can connect with a Bluetooth device within a maximum line-
of-sight distance of 10 m (30 ft).
Move this unit and the Bluetooth device closer to each other.
If this unit is visible as a device in the Bluetooth
settings of the Bluetooth device
Delete the device registration for this unit, and then perform pairing
once again.
If this unit is not visible as a device
Turn the Bluetooth function of the Bluetooth device o and then on
again; then begin pairing from this unit to pair the devices once again.
Too much feedback from the guitar Could the guitar be too close to this unit?
If acoustic feedback occurs when a guitar is connected:
5 Change the distance or angle of this unit relative to the guitar.
5 Use the VOLUME [+] [–] buttons or the [LEVEL] knob to adjust the
volume.
© 2018 Roland Corporation
This product is equipped with a lithium-ion battery.
Even if you do not use this product for an extended period of time, you should charge it once every three months to prevent the internal lithium-ion battery
from degrading.
Ambient temperature range during charging: 5–35 °C
However, in order to take full advantage of the rechargeable lithium-ion battery’s performance, we recommend that you charge it in a temperature range of
10–30 °C.

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland BTM-1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland BTM-1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Roland BTM-1

Roland BTM-1 Gebruiksaanwijzing - Nederlands - 1 pagina's

Roland BTM-1 Gebruiksaanwijzing - Deutsch - 1 pagina's

Roland BTM-1 Gebruiksaanwijzing - Français - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info