708968
24
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
MIDI Implementation
24
From the preceding table, since 0AH = 10, 03H = 3, 09H = 9, 0DH = 13
((10 x 16 + 3) x 16 + 9) x 16 + 13 = 41885
<Example4>
What is the nibbled expression of the decimal value 1258?
16) 1258
16) 78... 10
16) 4... 14
0... 4
Since from the preceding table, 0 = 00H, 4 = 04H, 14 = 0EH, 10 = 0AH, the
answer is 00 04 0E 0AH.
z Examples of Actual MIDI Messages
<Example1> 92 3E 5F
9n is the Note-on status, and n is the MIDI channel number. Since 2H = 2,
3EH = 62, and 5FH = 95, this is a Note-on message with MIDI CH = 3, note
number 62 (note name is D4), and velocity 95.
<Example2> CE 49
CnH is the Program Change status, and n is the MIDI channel number.
Since EH = 14 and 49H = 73, this is a Program Change message with MIDI
CH = 15, program number 74 (Flute in GS).
<Example3> EA 00 28
EnH is the Pitch Bend Change status, and n is the MIDI channel number.
The 2nd byte (00H = 0) is the LSB and the 3rd byte (28H = 40) is the MSB,
but Pitch Bend Value is a signed number in which 40 00H (= 64 x 128 + 0 =
8192) is 0, so this Pitch Bend Value is 28 00H - 40 00H = 40 x 128 + 0 - (64 x
128 + 0) = 5120 - 8192 = -3072
If the Pitch Bend Sensitivity is set to 2 semitones, -8192 (00 00H) will cause
the pitch to change 200 cents, so in this case -200 x (-3072) / (-8192) = -75
cents of Pitch Bend is being applied to MIDI channel 11.
<Example4> B3 64 00 65 00 06 0C 26 00 64 7F 65 7F
BnH is the Control Change status, and n is the MIDI channel number. For
Control Changes, the 2nd byte is the control number, and the 3rd byte is
the value. In a case in which two or more messages consecutive messages
have the same status, MIDI has a provision called “running status which al-
lows the status byte of the second and following messages to be omitted.
Thus, the above messages have the following meaning.
B3 64 00 MIDI ch.4, lower byte of RPN parameter number: 00H
(B3) 65 00 (MIDI ch.4) upper byte of RPN parameter number: 00H
(B3) 06 0C (MIDI ch.4) upper byte of parameter value: 0CH
(B3) 26 00 (MIDI ch.4) lower byte of parameter value: 00H
(B3) 64 7F (MIDI ch.4) lower byte of RPN parameter number: 7FH
(B3) 65 7F (MIDI ch.4) upper byte of RPN parameter number: 7FH
In other words, the above messages specify a value of 0C 00H for RPN
parameter number 00 00H on MIDI channel 4, and then set the RPN
parameter number to 7F 7FH.
RPN parameter number 00 00H is Pitch Bend Sensitivity, and the MSB
of the value indicates semitone units, so a value of 0CH = 12 sets the
maximum pitch bend range to ±12 semitones (1 octave). (On GS sound
ources the LSB of Pitch Bend Sensitivity is ignored, but the LSB should be
transmitted anyway (with a value of 0) so that operation will be correct on
any device.)
Once the parameter number has been specied for RPN or NRPN, all Data
Entry messages transmitted on that same channel will be valid, so after the
desired value has been transmitted, it is a good idea to set the parameter
number to 7F 7FH to prevent accidents. This is the reason for the (B3) 64 7F
(B3) 65 7F at the end.
It is not desirable for performance data (such as Standard MIDI File data) to
contain many events with running status as given in <Example 4>.
This is because if playback is halted during the song and then rewound
or fast-forwarded, the sequencer may not be able to transmit the correct
status, and the sound source will then misinterpret the data. Take care to
give each event its own status.
It is also necessary that the RPN or NRPN parameter number setting and
the value setting be done in the proper order. On some sequencers, events
occurring in the same (or consecutive) clock may be transmitted in an
order dierent than the order in which they were received. For this reason
it is a good idea to slightly skew the time of each event (about 1 tick for
TPQN = 96, and about 5 ticks for TPQN = 480).
TPQN: Ticks Per Quarter Note
z Example of an Exclusive Message and Calculating a
Checksum
Roland Exclusive messages are transmitted with a checksum at the end
(before F7) to make sure that the message was correctly received. The
value of the checksum is determined by the address and data (or size) of
the transmitted exclusive message.
{ How to Calculate the Checksum (Hexadecimal
Numbers are Indicated by ‘H’)
The checksum is a value derived by adding the address, size and checksum
itself and inverting the lower 7 bits.
Heres an example of how the checksum is calculated. We will assume that
in the exclusive message we are transmitting, the address is aa bb ccH and
the data or size is dd ee H.
aa + bb + cc + dd + ee +  = sum
sum / 128 = quotient ... remainder
128 - remainder = checksum
(However, the checksum will be 0 if the remainder is 0.)
<Example> Setting REVERB MACRO to ROOM 3
According to the “Parameter Address Map, the REVERB MACRO Address is
40 01 30H, and ROOM
3 is a value of 02H. Thus,
F0 41 10 42 12 40 01 30 02 ?? F7
(1) (2) (3) (4) (5) Address data Checksum (6)
(1) Exclusive Status, (2) ID (Roland), (3) Device ID (17),
(4) Model ID (GS), (5) Command ID (DT1), (6) End of Exclusive
Next we calculate the checksum.
40H + 01H + 30H + 02H = 64 + 1 + 48 + 2 = 115 (sum)
115 (sum) / 128 = 0 (quotient) ... 115 (remainder)
checksum = 128 - 115 (remainder) = 13 = 0DH
This means that F0 41 10 42 12 40 01 30 02 0D F7 is the message we
transmit.
z About Tuning
In MIDI, individual Parts are tuned by sending RPN #1 (Master Fine Tuning)
to the appropriate MIDI channel.
In MIDI, an entire device is tuned by either sending RPN #1 to all MIDI
channels being used, or by sending a System Exclusive MASTER TUNE
(address 40 00 00H).
RPN #1 allows tuning to be specied in steps of approximately 0.012 cents
(to be precise, 100/8192 cent), and System Exclusive MASTER TUNE allows
tuning in steps of 0.1 cent. One cent is 1/100th of a semitone.
The values of RPN #1 (Master Fine Tuning) and System Exclusive MASTER
TUNE are added together to determine the actual pitch sounded by each
Part.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland BK-9 - Midi Implementation bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland BK-9 - Midi Implementation in de taal/talen: Engels als bijlage per email.

De handleiding is 0,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info