167809
29
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
29
5.4 ADJUSTING INPUT SENSITIVITY
To reach a maximum noise-free dynamic headroom from each
individual head unit/amplifier/speaker combination, it is impor-
tant to set the respective input gain controls correctly. The input
level settings determine the actual signal-to-noise ratio, and they
are also responsible for obtaining the maximum distortion-free
SPL (sound pressure level) from your specific setup.
Turn-on your head-unit and set the volume control to approxima-
tely 3/4 of full volume, while playing a dynamic track from a CD.
Slowly increase the LEVEL adjustment control of the channel
pair, to which your subwoofer
system is connected to. Turn up the (sub channel) level control
knob until you can just about hear distorted bass sounds. Now
you reduce the volume level of your head unit to a "normal"
listening level and "add" all the remaining channel pairs, by
turning up the corresponding level controls - aiming for a ba-
lanced sound with a slight emphasis in the bass range. All
remaining channels, no matter if this concerns rear mounted
coaxials, component- or kickbass systems installed in the front
doors - must be balanced against the main level setting of your
subwoofer.
5.5 ADJUSTMENT OF PHASE SHIFT
CONTROL
The phase shift function of your RODEK amplifier can be ac-
tivated with the corresponding slide switch. The phase-shift
control enables you to match the acoustical phase relations of
subwoofer and the speaker system playing in the front doors,
either a component or a kickbass system. The target is that both
speaker systems, normally separated by aprox. 3m of distan-
ce are intended to play acoustically "in-phase" at the drivers
seat location. A good match of the acoustical phase between
subwoofer and the system in the front doors will give you the
impression of bass sounds coming from a place in front of you.
Or the other way round, the subwoofer playing in the trunk of
your car can not be localized that easily.
The second advantage is, that the upper bass region - i.e. where
the sound waves radiated by the subwoofer and the kickbass or
front door mounted component system are crossing over - will
sound considerably more precise and tight. This phase adjust-
ment can only be determined by ear, there is no rule of thumb
to find a good match, and you will definitely need somebody
to help you. To judge the effect of the phase-shift adjustment,
you must sit in the drivers seat, and somebody must adjust
the phase shift control knob until the sound reproduction in
the bass region is best. Furthermore, it might be necessary to
invert the (connection) polarity of your subwoofer - and re-adjust
the phase, if you can not find a proper match with the correct
in-phase polarity subwoofer connection.
5. CROSSOVER SETTINGS
Ro 1-2-4-CH Manual_D+E def.indd 29 01.03.2006 10:55:38 Uhr
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rodek r 4100 n bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rodek r 4100 n in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info