67791
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
You have purchased one of the finest car-audio trunk box
subwoofers available today. RODEK bandpass subwoofers
are engineered and manufactured to set new benchmarks
of bass performance and technical reliability. Both available
subwoofer models are based on the “push-pull” compound
arrangement, i.e. two woofers that are mounted face to face.
The result of this unique construction is deeper bass with
more impact and higher power handling, compared to boxes
deploying one woofer only with the same net volume.
Both box models use MDF for the cabinet construction and
are equipped with RODEK RW12 woofers.
Please read and follow the provided installation and operating
instructions carefully, in order to benefit from the full sound
quality and performance of this high quality product.
Special Features:
Loaded with two or four RW12 push-pull subwoofers
Optimized for best low-end extension and high SPL
Large cross section ports with blue glowing „needles“
CNC routed MDF enclosure of compact dimensions
Carpet covered main enclosure with PA-painted front
Acrylic glass window with blue LED backlighting
Space optimized angled rear wall construction
Internal damping for best sound quality and bass impact
Spring-loaded terminal with separate 12V input
Placement Connection Settings
Basically, your trunkbox subwoofer is designed to be placed
in the trunk compartment of your car. The terminal binding
posts allow quick and easy installation or removal of the trunk
box – if necessary.
Only start crossover adjustment of the amps’ or headunits’
crossover lowpass filter, after setting „treble, „bass“ and „loud-
ness“ controls on the head unit to neutral/zero position.
Your bandpass subwoofer needs a low-pass filtered signal
with 12dB/oct. slope steepness for best results.
Connect the speaker wire of your subwoofer amp channel
to the terminal of the subwoofer box.
Set the lowpass crossover frequency of the amp channel(s)
driving the sub to approx. 80 Hz
Increase the input gain of the subwoofer channel(s), until
bass output is loud enough
Turn down the volume and then, try out both electrical in-
phase and out-of-phase polarity connections
„In-phase“ connection of your subwoofer is critical if your
sub plays out of phase, the output at the crossover frequency
region will be depressed due to cancellation effects.
Thus one connection polarity will give you a „fatter“ and more
dynamic bass reproduction in the 80Hz range.
In general, selecting a crossover frequency too low will yield
to an unprecise and infra-bass heavy bass sound lacking
punch, whilst setting the corresponding lowpass x-over fre-
quency point to high, will render a hard and droning sound
reproduction.
COMPOUND BANDPASS SYSTEM
Specifications RN112 RN212
Peak Input Power: 400 W 2 x 400 W
Continuous Input Power: 250 W RMS 2 x 250 W
Frequency Response (In-Car -3dB): 20 – 120 Hz 20 – 120 Hz
Sensitivity (1W/1m): 92 dB 95 dB
Nominal Impedance: 4 ohms 2 x 4 ohms
Dimensions (WxHxD): 500 x 390 x 435/335 mm 870 x 390 x 435/335 mm
RN112 / RN212
12300 Edison Way · Garden Grove · CA 92841 U. S. A.
www.rodek.com
Limited warranty: 2 years, starting from purchase at retail.
This warranty does not cover any damage due to:
1. Speaker overload due to excessive or distorted amplifier power etc.
2. Exposure to excessive humidity, fluids, heat, direct sunrays or excessive dirt
or dust.
3. Accidents or abuse, unauthorized repair attempts and modifications not
explicitly authorized by the manufacturer
WARRANTY CONDITIONS
This warranty is limited to the repair or the replace-
ment of the defective product at the manufacturer´s
option and does not include any other form of da-
mage, whether incidential, consequential or other-
wise.
This warranty will not cover any loss during trans-
portation, transport costs or any other damage
caused by transport or shipment of the product.
For safety and legal reasons, it might be prohibited using the box illumination while operating a car. Restrictions may apply
in certain countries. For making sure to follow all national requirements and not to distract drivers attention, we recommend
connecting the box illumination to the interior light of the trunk.
RN112 RN212 Manual.indd 2 09.04.2007 11:15:42 Uhr
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rodek RN112 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rodek RN112 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info