520094
84
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Model helicopters
FX-40
It is also possible to define a transmitter control for adjusting
the trim pre-set values for the upper and lower speed range;
this is selected in the appropriate field. Mark the field, and the
transmitter control / switch select menu appears. The trans-
mitter control can then be selected in the familiar manner. The
selected control is then displayed in the ‘Transmitter control’
field.
The two screen shots below show possible settings of the
‘Multi-motor’ option for both display levels.
NOTE:
If this function is active, you must assign the switch for ‘Motor
of
f
’ in the ‘Motor off’ menu.
The values set in the ‘Motor off’ menu are now invalid, as they
are supplanted by the values selected in the ‘Multi-motor’
menu.
NOTE:
If you enter multiple motors (two to max. four) when selecting
the model type, set-up windows for the same number of
motors will appear in various options.
19. MODEL MENUS (MODEL HELICOPTERS)
This Section analyses the settings which are specific to model
helicopters, i.e. it only covers those options which have not
already been described in Section 17 (see page 54). Activate
the Model menu by touching the field showing the pictur
e of
the model aircraft in the main picture screen. This calls up the
overview of the Model menus. The Select menu varies accor-
ding to the model type you choose. The screen shot below
shows an overview of the Model menus for model helicopters.
The following section describes the options which have not
already been analysed in these instructions. We will use as our
example the Model menu for a helicopter equipped with the
most popular ‘H-3 (120°)’ swashplate type.
Coll. curve = Collective pitch curve settings
Throttle curve = Throttle curve settings
Acceleration = Acceleration, throttle / collective pitch
function
Auto-rotation = Auto-rotation settings
Swashplate Mix. = Swashplate mixer
Throttle / motor Mix= Swashplate -> throttle mixer
Coll. -> needle = Collective pitch -> needle valve mixers
Coll. -> tail = Tail rotor mixer
Gyro = Gyro settings
Speed gov. = Rotational speed governor (regulator)
* CND HOLD = Hold flight mode (CND HOLD); see des
cription in Part 1, Section 16.18,
page 52
83
84

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info