520096
21
Verklein
Vergroot
Pagina terug
1/119
Pagina verder
21
Transmitter's Antenna (TM-10 module only):
1. The transmitter antenna is adjustable so please make sure that the antenna is never
pointed directly at the model when ying as this creates a weak signal for the receiver.
2. Keep the antenna perpendicular to the transmitter's face to create a better RF condition
for the receiver. Of course this depends on how you hold the transmitter, but in most
cases, adjusting the transmitter antenna so that it is perpendicular to the face will
give the best results. Please adjust the transmitter antenna to the way you hold the
transmitter.
3. NEVER grip the antenna when ying as this degrades RF quality.
Range Testing Your R/C System
Please note that different systems demonstrate different range checks and the same system will range check differently in
different conditions. Also, the receiver antenna's installation affects the range test. This is a brief explanation of range test.
For more in-depth speci cs on receiver antenna mounting, additional checks if unsatisfactory rage is demonstrated, range
checking with gasoline powered engines, etc, please see our F.A.Q. page at www.futaba-rc.com.
• Leave the transmitter's antenna retracted or switch to the power down mode when using a
TM-10 module.
(See p.17 for the information of "Power Down Mode".)
• be sure both batteries are fully charged.
• Position the aircraft away from wires, other transmitters, etc.
Test one - engine/motor off, minimum of 100 ft. range
• Have a friend view the model but not hold it, engine off. (People conduct signals, too!)
• Walk away from the model, working all controls constantly. Stop when the servos jitter signi cantly (a jitter here and
there is normal), control movement stops (PCM, 2.4GHz), or you lose control altogether.
• Measure the distance. If greater than 100 feet, great! Proceed to Test 2. Less than 100 feet of range check means you need
more information to determine if your system is safe to y. Please see our web site or call support for additional tests to
perform before ying your system.
• Repeat with friend holding the model. Note any differences.
Test two - engine/motor on
• Repeat the test with the model's engine running and with someone holding the model. If a decrease of more than 10% is
noted, research and resolve the cause of interference prior to ying your model.
What your fully operational system demonstrates is the normal range for your system in those conditions. Before every
ying session, it is critical that you perform a range check. It is also required by the AMA Safety Code. If you notice a
signi cant decrease in range with fully charged batteries, do not attempt to y.
WARNING
After the linking is done, please cycle receiver power and check if the receiver to be linked is really
under the control by the transmitter to be linked.
Do not perform the linking procedure with motor's main wire is connected or the engine is operating as
it may result in serious injury.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FF-7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FF-7 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Robbe Futaba FF-7

Robbe Futaba FF-7 Gebruiksaanwijzing - Deutsch - 57 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info