520097
116
Verklein
Vergroot
Pagina terug
1/119
Pagina verder
116
set up 2 similar models, or make a copy of a working model to experiment with new setups. Also used to copy models to/
from the CAMpac data storage unit. ................................................................................................................................... 31
MODEL
NAME
: gives each model memory an 8-character name for easy recognition. In
MODEL
submenu. .......................... 32
MODEL
RESET
: restore all data in a single model memory to defaults, including name and model type. See
RESET
.
MODEL
SELECT
: choose the model memory you wish to modify or y. In
MODEL
submenu. ................................................ 30
MODEL SELECTION ERROR
: the memory last loaded in the transmitter is not currently available (usually because it is on a
CAMPac not currently in the transmitter). See Error messages.
MODEL
TYPE
: select the type of model the aircraft is, including airplane, 2 glider types, and 5 heli types. ......................... 34
MODUL
: modulation, means of transmitting data (
PPM
,
PCM
). In
PARAMETER
submenu. ..................................................... 35
Module: electronic component which can easily be removed/replaced into the transmitter, which houses all transmission
components. Transmission frequency can be safely, legally and easily changed (including from band to band) by changing
the module. TP-FM is the standard module, available on any 50MHz or 72MHz frequency. You may also purchase
TP75FM for ground use, 75MHz. .......................................................................................................................................... 9
MOTOR CUT
(
GLID
): provides an easy way to stop the motor by ipping a switch regardless of the AIRBRAKE STICK
position. ................................................................................................................................................................................ 79
Name: see
MODEL
NAME
.
Neckstrap: optional strap to suspend transmitter during use. Futaba stock # FTA8. See Accessories.
Ni-Cd: Nickel Cadmium rechargeable battery. Typically used to power transmitter and receiver. See Battery care and
charging.
NiMH: Nickel Metal Hydride rechargeable battery. Newer battery technology than Ni-Cd. Longer run times but more
speci c peak charging requirements. [Require a (zero) delta peak charger labeled speci cally for use with NiMH batteries.]
NORMAL
: trainer mode that does not give student radio the computer programming features of the master radio. See
Trainer.
NT8S: standard transmitter battery pack. See Accessories.
NULL
: not assigned or never changed. Ex: a mix which has a null switch assignment is always active, and can never be
changed in ight (turned off) no matter which switch is moved.
OFFSET
: (
HELI
) separate trim settings available to each idle-up (using
CONDITION
) setting, or assigned to separate switches
from the condition switches. When offset is
ON
, movement of the trim levers adjusts the
OFFSET
, not the normal condition's
trims. ..................................................................................................................................................................................
102
OFFSETs
: additional ight conditions available specif cally for sailplanes ......................................................................... 84
Offset mix: mix that independently moves the slave servo a set percentage of its total throw, not in relation to any master.
See Programmable mix.
PA2: Pilot Assist. Optional onboard device that uses optical sensors to correct modelis orientation to upright.
PARAMETER
submenu: sets speci c parameters. Includes reset, type, modulation, second aileron servo setup, and
ATL
. ... 33
PCM: Pulse Code Modulation. An electronically encoded method of transmitting data to a receiver to help minimize
the effects of interference. (Transmission is on an FM wavelength, and uses FM crystals, module and trainer cord.). See
Modulation.
Peak Charger: charger that automatically stops charging when the battery is fully charged (commonly called ipeakedi). See
Battery care and charging.
Piezo gyro: gyro that uses a piezo crystal to sense angular changes. See Gyros and Governors.
Pitch-to-rudder mix: see
REVO
.
116

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FF-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FF-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Robbe Futaba FF-10

Robbe Futaba FF-10 Gebruiksaanwijzing - Deutsch - 92 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info