592102
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
EnglishEnglish 5 6
TURNTABLE OPERATION
Preparation
Open the Record Player Cover.
Listening to Records
5. Lift the Tonearm with the Tonearm Lift Lever.
6. Move the tonearm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
8. When the record is finished the tonearm will automatically stop and return to the rest .
9. To stop manually, lift the tonearm from the record and return it to the rest.
to the Tonearm. Reinstall the protective cap on the stylus when not in use.
How to suspend play
Setting the cueing lever to the UP position will lift the tone arm and then the play stops.
How to use manual cueing
The cueing lever is used when you want to momentarily interrupt the tone arm. Move the
lever gently to the "UP" position to interrupt the playing and to the "DOWN" position to
resume playing.
Keep the cueing lever in the down position when you are not using it.
central spindle when playing 17cm EP records.
3. Set the Speed Selector (5) to 33 or 45 rpm according to the record.
4. Release the tonearm clamp, and remove the protective cap from the stylus.
1. Set the power ON/OFF SWITCH (3) to ON position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
ENCODING OF PHONO INTO MP3 FILE
-The recording format is preset at MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recroding, press the RECORD button again during record mode.
the USB or SD/MMC card.
The system is able to ENCODE TURNTABLE to MP3 format and recording at memory
media with USB / SD / MMC connecting port.
REMARK:
- The recording speed is 1:1 and according to the actual plying time of the track
- The system will creat a AUDIO folder and then store the encoding track in it.
10. To automatically stop the record, press the “EJECT” button (15).
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tonearm clamp could result in damage
PHONO ENCODING
Start playback at PHONO for the track which you want to record to USB.After
finishing of recoding, press and hold the RECORD button on the unit (12).
-Recording will be completed only entire song being encoded, if terminate the
encoding process intermediately, there is no track being recorded nor stored to
LED
USB Record Operation and LED Signal Indication:
1. USB storage device is not plugged. -> LED light is off
2. USB storage device is plugged in -> LED flashes
3. When the system is ready to record. -> LED light is on
4. Press REC button to start recording. -> LED blinks slowly.
5. Press SPLIT button to create new file in the recording.
6. Press REC button again to stop recording. -> LED is flashing for a short
time, and then LED light stably lights on again.
Note: Do not remove the USB storage device if the LED is flashing.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roadstar TTL-850USDE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roadstar TTL-850USDE in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info