592133
5
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
English English
5 6
longer the bar will be from left to right.
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster
may include in their transmissions. The message usually includes information such as
programme details …etc.
Programme type
This describes the style of the programme that is being broadcast. If the information is
not available, the display will show
“<Program Type>”.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together
in a single frequency. There are national and local multiplexes, local ones contain stations that
are specific to that area.
Note: Press and hold the INFO button for longer than 2 seconds, the software version number
will be displayed.
FM RADIO
1. To select FM, repeatedly press the MODE button until you see “Switch to FM” is displayed,
the display will finally show FM
and the frequency.
2. To activate auto search, turn and hold the SELECT control until it starts to scan the
frequency band, the display will show
“Searching … > .” or “Searching < .”, and it will stop automatically once a station has been
found.
3. To activate manual tuning, repeatedly turn the SELECT control and when you see your
desired frequency appears in the display, release the control.
4. To select the FM stereo/mono reception mode, press the SELECT button to toggle
between the Auto” or “Mono” selection.
Note: The radio will automatically switch between the stereo and mono reception, but you can
override this and switch this function manually which is helpful for poor signal reception.
STORING AND RECALLING STORED STATIONS
In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will
enable you to get direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the PRESET
button until the display shows Save to P#” and flash.
2. Repeatedly turn the SELECT control to select your desired station preset number then
press the SELECT button to confirm your selection, the display will show “Preset # saved”.
3. To recall a preset station, first press the PRESET button once, then repeatedly turn the
SELECT control to scroll up or down
the presets that you have stored. When the display shows your desired preset number, release
the control. If the preset hasn’t been allocated a station, the display will show “Empty preset #”.
ALARM FUNCTION (AC operation only)
This unit incorporates an identical Dual Alarm function in AC operation. You can have
two individual alarm wake-up time and wake-up mode settings to wake you to an
electronic buzzer tone or your favourite radio station (DAB/FM). There is no alarm
function in battery operation.
Setting the alarm time and wake-up mode
1. Press the ALARM button once to enter into the Alarm Menu, then repeatedly turn the
SELECT control followed by pressing on the SELECT button to select Alarm (1 or 2).
2. Again repeatedly turn the SELECT control to select Alarm Setting, then press the
SELECT button to confirm, the display will show “Alarm # Setting” and the hour digit of the
alarm time will flash.
3. Repeatedly turn the SELECT control followed by pressing on the SELECT button to
adjust and confirm your desired alarm time first set the hour and then the minute.
4. After the confirmation of the minute setting, the alarm time is set and you will enter into
the wake-up mode settings.
5. Again repeatedly turn the SELECT control followed by pressing on the SELECT button
to adjust and confirm the wake-up mode settings first set the DAB and FM Preset (1-10),
then the Buzzer Tone (1 or 2), finally the alarm Volume level.
6. After the confirmation of the alarm volume level setting, the wake-up mode settings are
all completed and the alarm function
is now ready for you to activate.
7. Repeat the above procedures to set the other Alarm (1 or 2).
Activating the alarm function
1. To activate the alarm function, first press the ALARM button to enter into the Alarm
Menu, then turn the SELECT control followed by pressing on the SELECT button to select
Alarm (1 or 2).
2. When the display shows Alarm Source”, press the SELECT button to go for the
selection.
3. Repeatedly turn the SELECT control and the associated alarm wake-up mode will be
displayed and changed in the below sequence:
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roadstar HRA-1300DAB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roadstar HRA-1300DAB in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info