592089
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
EnglishEnglish
NORMAL DISC PLAY
Open the disc compartment by lift on the CD OPEN right corner and load a CD.
Close the disc compartment.
Press the PLAY / PAUSE button (7). The disc play will begin from the start of the first
track of the disc.
A particular track can be selected using either the CD Skip buttons (8,24). If this is done
before pressing the PLAY / PAUSE (7) button, disc play will start with the selected track
when the PLAY / PAUSE button is pressed.
At the end of the disc, the unit will switch to stop mode.
Notes: If the disc is deeply scratched, or too dirty, disc play may not start.
If on improperly centred disc is played, noise can be heard in the mechanism. The
use of such discs should be avoided.
IMPORTANT INFORMATION
This compact disc player has built-in error compensation circuits to correct for minor defects
in a disc.
There are limits, however, to the amount of correction available.
In some cases, the CD / MP3 player may skip some tracks on a disc during disc play. This
problem may be cause by defects (such as scratches) in the disc being played, which are
too large for the error compensation circuits to handle. If you encounter this problem, check
the CD player’s operation as follows, before having the unit serviced:
Play a new disc. If the CD player operates normally, the skipping problem is probably due to
a defective disc.
TO STOP A CD PART WAY THROUGH
Press the Stop button (7). Disc play will stop and the display will show the total number of
tracks for the CD.
To temporarily stop disc play (pause mode), press the Play / Pause button. Disc play will
pause at the current play position. The Play/Pause indicator will flash.
To resume disc play, press the Play/Pause (7) button again.
TRACK SKIP (CD / USB)
STARTING DISC PLAY FROM THE BEGINNING OFA PARTICULAR TRACK
Press the Forward or Reverse Skip / Search Track button (8,9) to select the desired track.
The number of the selected track will be shown on the display. Press the Play/Pause button
to start play.
TO SKIP TO THE NEXT TRACK
Press the Forward Skip / Search Track button (8) once. Play will resume at the beginning
of the next track.
7 8
The player will skip ahead to the next track each time the Forward Skip / Search Track
button is pressed. Continuously pressing the Forward Skip / Search Track button makes
the player skip ahead through the track by track. Once the beginning of the last track is
reached the player will not advance any further.
TO SKIP BACK TO THE PREVIOUS TRACK (CD / USB)
Press the Reverse Skip / Search Track button (8/9). If this button is pressed in the middle of
a track, the player will skip back to the beginning of that track. To make it skip back to the
previous track press the Reverse Skip / Search Track button (9) twice.
Continuously pressing the Reverse Skip / Search Track button makes the player skip
back through the disc track by track. Once the beginning of the first track is reached, the
player will not go back any further.
Notes: Tracks can be selected even when the Compact Disc compartment is open. However
if a track number is selected that is not present on the CD, disc play will start from
the beginning of the last track.
PROGRAMMED PLAYBACK (CD / USB)
It is not possible to enter programs during CD/USB play. Press the Stop button (7) first, then follow
the instructions below.
Press the PROGRAM button (13). “P01” and the PROGRAM indicator will light up.
Press the Forward and Reverse Skip Track buttons (8/9) to select the track to be stored in
position1.
Press the PROGRAM button (13). The first program selection is now stored in the program
memory 1.
Select the next track to be programmed using the Forward and Reverse Skip Track (8/9)
buttons.
Press the PROGRAM button (13) to store this track.
Continue entering tracks in this way until all the desired tracks are stored (up to a limit of20).
When the PROGRAM button (13) is pressed to store the 20th track, the display will return to
the 1st program location. Press the PROGRAM button (13) to step through the program
locations.
Listening to Programmed Tracks (CD / USB)
Press the Play Pause button (7). Disc play will start at the beginning of the first programmed track.
To Clear The Program Memory (CD / USB)
If the disc is playing, press the Stop button (25) to stop the disc.
Switch the Function (11) selector to a different position (RADIO/AUX) to clear the Program.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roadstar HIF-3650UMP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roadstar HIF-3650UMP in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info