English English 1 2
LOCATION OF CONTROLS
1. MODE / OFF / ON SWITCH (RADIO)
2. SLEEP BUTTON
3. SET CLOCK BUTTON
4. TUNING DOWN
5. CLOCK LCD DISPLAY
6. MEMO BUTTON
7. VOLUME DOWN
8. VOLUME UP
9. TUNING UP
10. SNOOZE / LIGHT BUTTON
11. ALARM 1 BUTTON
12. ALARM 2 BUTTON
13. IMAGE ROTATION
14. FOCUS PROJECTION
POWERSUPPLY
This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power
cord to the AC household main outlet. Ensure that the voltage
is as indicated on the rating plate on the rear of the unit.
BATTERY BACK-UP POWER FAILURE PROTECTION
This radio has a battery back up circuit that will keep the correct time and alarm
settings in the event of a temporary power interruption. Install a 3V battery (type
CR-2032), not included, into the battery compartment (11) located on the bot-
tom of the unit.
Note: We recommend an alkaline battery for longer usable life. Change the
battery every 9 to 12 months for best result and avoid possible battery leakage.
If power is temporarily interrupted the display will blink and the radio will not
play. However, the battery back-up circuit will continue to maintain the clock and
alarm settings. When power is restored the clock will display the correct time
and alarm settings, and no adjustment is necessary.
Note: If power is interrupted and there is no battery in the compartment or
WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to quali-
fied personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the
unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
