592178
4
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
EnglishEnglish
5 6
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
MAIN UNIT BATTERY POWER
To install batteries:
Open the battery compartment (on the back of the panel) by pushing down on the two
tabs at the upper edge of the compartment cover. Pull the cover away from the back
panel.
Switching On the Unit
l After connecting the power, the display will show AM 0:00. Remain this mode , the unit
would turn of automatically after 15 minutes. Press STANDBY button to turn on the unit
and press STANDBY button again to play.
l ESD hints-The product maybe reset or not reset to operation of control due to
electrostatic discharge, just switch off and reconnect again.
l Setting the Time
Note: Please make sure that all connections have been ready.
1. In standby mode the LCD display will flash 0:00. Press the SET/ID3 button, the display will
show the RTC 12 hours or the RTC 24 hours version. Press SKIP UP /DOWN button
on unit or on remote to choose for the 12 or 24 hour version. Press the SET/ID3 button to
confirm.
2. After confirm the hours system, the Hour digits will flash, press the or button on unit or on
remote repeatedly to set the clock to the correct Hour, press the SET/ID3 button to confirm.
Then the minute digits will flash, press the or button on unit on remote repeatedly to set
the clock to the correct Minutes, press the SET/ID3 button again to confirm.
Waking up the music (Radio/CD/USB)
You can set the timer to wake up the Radio, CD/MP3 or USB.
1. After setting the time in standby mode, press and hold the TIMER button on unit or press
TIMER key on remote control to set the desired wake up time.
2. Enter the desired hour with the or button, press the TIMER button on unit or on remote
control to confirm. Enter the desired minutes with the or button, press the TIMER button
on unit or on remote control to confirm. Then choose the desired wake up mode (RADIO/
CD/USB) by or button and press TIMER button on unit or on remote control to confirm.
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect this
unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power
sources may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
LITHIUM BATTERY INSTALLATION OF REMOTE CONTROL
l The remote control includes one CR2025(3V) lithium battery.
l To replace the battery, gently push the clasp to the right direction
accordingly to the instruction and then pull out the battery compartment.
Take the drained battery out and install a new lithium battery (CR-2025)
in the compartment with the positive polarity upward. Then push the
compartment back to its position with a “clicksound indicating installation
finished
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roadstar CDR-7000U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roadstar CDR-7000U in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info