744710
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
10
Current-free log operation
Note
Your stove must be disconnected from the mains for current-free
operation.
Note
Any modification of the procedure stated above may result in
damaging of components, which automatically will void any
warranty claims.
Insert the socket spanner supplied in the sleeve, as shown.
Turn it clockwise until a slight stop can be felt.
Remove the socket spanner from the opening and insert it again in
horizontal position.
Turn the spanner ant-clockwise until it is flush with the marking in
the side panel (approx. 45°). It is now in heating up position.
After heating-up has been successful, turn the spanner anti-
clockwise step by step to reduce the combustion air manually, thus
regulating the burn-off.
Each time logs are added, the spanner must be brought into heating
up positon again. The combustion air is regulated as described
above.
Note
Always ensure that the stove has enough air for combustion.
Combined operation
Automatic ignition of firewood during start-up, or automatic log
recognition during operation.
Automatic ignition of firewood during start-up
Place two logs into the firebox. Be sure that at least one of the logs
lies above the combustion trough to facilitate burning. Close firebox
door.
Start stove operation. After ignition has been successful, the
operating state IGNITION switches to LOG CHECK, and after
successful log recognition to LOG OPERATION.
Note
If no more logs are reloaded, pellet operation starts automatically
again as the unit is still on.
Automatic log detection during operation
Open the firebox door and place 2 logs into the box. Be sure that
at least one of the logs lies above the ignition trough to facilitate
burning.
Close firebox door. The operating state switches from CONTROLLED
OPERATION to LOG CHECK, and after successful log recognition to
LOG OPERATION.
Note
If no more logs are reloaded, pellet operation restarts automatically
as the unit is still on.
If you switch the combi stove off during log operation, the operating
state will change to STOVE OFF after the logs have burned down.
Easy-refilling operation
In order to reduce the discharge of fluegas when refilling logs there
is a easy-refilling operation available.
unhide additional
functions
hide additional
functions
Open the fluegas
flap
Wait about 3 seconds before you open the combustion chamber
door to refuel.
After closing the combustion chamber door, turn the wrench
clockwise to close the fluegasflap.
Tip
If the flue gas flap is open, a warning appears on the display. It
expires when you close the flue gas flap.
Note
Pellet operation is not possible with an opened flue gas flap.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Rika-Touch-Display-V2-23

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rika Touch Display V2-23 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rika Touch Display V2-23 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Rika Touch Display V2-23

Rika Touch Display V2-23 Gebruiksaanwijzing - Nederlands - 14 pagina's

Rika Touch Display V2-23 Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info