490424
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
2. Attach & Detach The Battery Pack
Fit the bottom edge of the battery pack into the holes of the transceiver cabinet bottom.
Push the battery pack down to the transceiver aluminum chassis until the end click.
To Detach The Battery Pack
Keep pressing the release buckle of the battery pack and lift the battery pack up from the
transceiver body. Note: It is normal for this buckle to be stiff.
3. Charging The Battery Pack
[1] Connect the jack of AC adaptor into the
socket of the charging cradle.
[2] Plug the AC adaptor into the power outlet.
the built-in green LED of cradle will grow.
[3] Insert the radio into the cradle. the built-in
red LED of cradle will flash.
[4]Rapid charger finish charging for
approximately 2 hours and the charger close
charing after 6 hours absolutely. the built-in
Full LED of cradle will grow.
Make sure the radio is turned off while charging.
Do not forget to remove the radio from the charger when the battery is fully-charged.
LED Color
Status Indication
Continuous Yellow
AC power supply is well connected.
Continuous Red
Fast charging mode
Continuous Green
Fully charged
Flashing Red over 5 minutes
Something wrong with charging circuit or
battery pack. Please check!
Flashing Red for 5 minutes
Slow charging when battery voltage is too
low to be fast charged
4. Basic Operation
Turn The Radio On/Off & Adjust Volume
Rotate the PWR/VOL knob clockwise till the radio is turned on. Voice announcement for
channel number will be heard after auto testing is done, if voice announcement is enabled
through PC programmer.
Enable Monitor function (Programmable in C or D button) to hear the background noise as
volume reference. Rotate the PWR/VOL knob clockwise to increase its volume or counter-
clockwise to reduce its volume.
To turn the radio off, rotate the PWR/VOL knob counterclockwise to the end.click.
Channel Selection
RL-308 is allowed to be programmed with 16 channels * 16 groups = 256 channels totally.
To select a channel: Rotate the channel selection knob to choose the channel you want.
Voice announcement for channel number indicator (programmable) will be heard.
To select a group: Keep holding button D and rotate the channel selection knob for
choosing the group. After releasing D button, you can select the channel as procedure 1.
A continuous DU sound will be heard if you switch to a channel or a group not being
programmed in advance.
Receiving
RL-308 can be programmed to work channel by channel in “Open traffic” or “Group
Mode” (CTCSS/DCS/Selcall). Group mode prevents other users on the same channel from
being heard on your radio. LED indicator will glow green & speaker will be unmute when the
radio receives a call.
Monitor
This allows you to over ride the squelch and the “CTCSSor “DCS” tones. It is useful to monitor
the channel before you transmit to ensure there is no one using the channel when you have
CTCSS or DCS tones programmed. Monitor function can be programmed in button C or D
with long press or short press. Ask you dealer how it is set up through PC programmer.
2
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rexon RL-308 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rexon RL-308 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info