491271
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Fuse replacement
If it becomes necessary to replace a fuse, make sure that only fuses of the prescribed type and nominal
current are used (see “Technical Data”).
ƽ
You must not carry out your own repairs to fuses or bridge the fuse holder.
Disconnect the monitor from the power supply.
Open the fuse holder in the lead wire.
Remove the defective fuse and replace it with a fuse of the same type.
Close the fuse holder again.
Only then the monitor should be re-connected to the car system and put into operation.
Should the fuse trigger again, have the device repaired in a specialist workshop.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the household
waste!
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Remove the battery in the remote control and dispose of it separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable batteries. Do
not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that
disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (marking can be seen on the battery/rechargeable bat-
tery, e.g., underneath the rubbish bin symbol shown on the left).
You can return used batteries/rechargeable batteries free of charge to any collecting point in your local com-
munity, in our stores or in any other store where batteries/rechargeable batteries are sold.
You thereby ful l your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage ..........................................12 V/DC
Power consumption .......................................300 mA
Battery for remote control ..............................3 V lithium button cell CR2025
Fuse ...............................................................T2AL/250V (5 x 20 mm)
Display size ...................................................17.8 cm (7”)
Display format ................................................16:9
De nition ........................................................480 x 234
TV format .......................................................PAL/NTSC
Dimensions (without mounting frame) ...........172 x 114 x 24 mm
Installation opening ........................................177 x 120 mm
Mounting depth ..............................................18 mm
Range of operating temperature ....................0 – 50 °C
Weight ...........................................................300 g
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Operation
(1) ON/OFF switches the monitor on/off
(2) MODE switches between different screen settings
DEFAULT Basic settings
VIVID High-contrast screen setting
SOFT Soft screen setting
LIGHT Bright screen setting
USER Personal screen setting
(3) “-” turns the volume down or changes settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times, settings
are performed via the “-” and “+” keys
BRIGHT Brightness adjustment
CONTRAST Contrast adjustment
COLOR Colour adjustment
VOLUME Volume adjustment
SOURCE Selection of the input: VIDEO 1 IN/VIDEO 2 IN
MODE Switching of the display format (16:9/4:3)
TCON Re ection and/or rotation of the screen display
RESET Restoring factory settings
(5) “+” turns the volume up or changes the settings in the menu
(6) AV IN for the connection of external AV devices
(7) Headphone socket
(1) POWER switches the monitor on/off
(2) VIDEO SELECT switches the video input (VIDEO 1 IN/VIDEO 2 IN)
(3)
turns the volume up or changes the settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times, settings
are performed via the “- or
” and “+ or ” keys (see above for features)
(5)
turns the volume down or changes the settings in the menu
(6) MODE SELECT switches between different screen settings (see above for features)
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce T-701B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce T-701B in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info