699229
51
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
51
12. Troubleshooting
With the Renkforce car radio, you have purchased a product built to the state of the art and operationally safe. If you
encounter any problems or interferences nevertheless, the following explanations may help in troubleshooting.
No playback, no display, and the lights are out
• Car fuse defective. Look up the respective fuse in the operation manual of your car. Check the fuse.
• The fuse of the SD tuner is defective. Remove the device and check the fuse.
• The positive line/earth line is loose. Remove the device and check the connections of the cables.
Playback only through one speaker
• The balance control is wrongly adjusted. Adjust the balance control as described.
• The speaker connection has come loose. Remove the device and/or speakers and check the connections.
Playback only through the front or rear speakers
• The fader control is not adjusted correctly. Adjust the fader control.
• The speaker connection has come loose. Remove the device and/or speakers and check the connections.
In radio operation hardly any stations can be received
• The aerial is not pulled out completely. Pull out the aerial to its full length.
• The aerial connection has come loose. Remove the device and check the connection.
• The aerial is defective. Check the connection, earthing and the aerial itself.
Interferences in radio and USB or SD card operation
• Interferences reach the SD tuner via the positive line. Install an additional interference suppression coil into the
positive line.
• If necessary, also equip the vehicle with spark-plug suppressor sockets, distributor arms, etc. to suppress
interferences.
• Bad ground connection. Check ground connection, use other grounding point if required.
When you press a station button, you only hear hissing
• No station has been programmed. Program the stations as described above.
• The continuous positive line is not connected, or has come loose. Connect or check the continuous positive line as
explained in the instructions or check whether the cable is correctly connected. Check the fuse.
The device no longer responds to button commands or displays weird characters
• Reset the device to factory settings with the RESET (22) button.
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce RUSD-1803BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce RUSD-1803BT in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info