656692
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
You can nd the SmartBand app on the iOS app store or on Google Play by searching
for “SmartBand”.
Install the latest version of the app on your mobile device.
d) Pairing with a mobile device
The sport wristband is paired directly via the SmartBand app and not via
the Bluetooth
®
settings on your mobile device. Check that Bluetooth
®
is
enabled on your mobile device. The mobile device must support Bluetooth
®
version 4.0.
Open the SmartBand app.
Tap the top-left of the control panel to open the app's main menu.
Select “Setting”.
Scroll down until you can see the “Wrist Band Setting” menu option.
Tap the “Wrist Band” submenu. Tap on “Pair” on the next page.
When the app is searching for Bluetooth
®
devices, press and hold the function
button (1) on the LED unit. Let go when MENU is displayed. Wait until PAIR is
displayed and briey press the function button. PAIR begins to blink.
DONE is displayed when pairing has been completed successfully. PAIR will
disappear after about 20 seconds if pairing with the app was unsuccessful.
Training data will be synced automatically as soon as the sport wristband is
connected to the SmartBand app. Bluetooth must be enabled in the mobile device
settings for this function to work. Syncing takes place automatically each time you
open the SmartBand app.
To unpair your mobile device and the sport wristband, go to the the “Wrist Band”
submenu as described above and then tap “Unpair”.
Operation
a) Turning on/o, calling up menus
Press and hold the function button (1) to turn the wristband on. A welcome message
will be displayed.
Press the function button and hold it down until MENU is displayed. All available
main menus will be displayed in a loop (g. 6). Wait until the desired menu appears.
Briey press the function button when a menu item is displayed in order to select it.
Fig. 6
Wait until OFF is displayed. Then press the function button to turn the wristband o.
A goodbye message will be displayed.
b) Recording and viewing training data
Press and hold the function button (1) until MENU appears.
Wait until WORK is displayed.
Press the function button to start recording data. GO is displayed. You can now
begin your training program.
Press the function button during your training to display the intermediate training
values (g. 7).
Fig. 7
Training time Number of steps
Distance coveredCalories burnedTraining progress
Press and hold the function button until STOP and DONE are displayed. Data
recording for your training session is stopped. REC appears. The saved data will
then be displayed automatically (g. 8).
”Number of steps”, “completed distance”, “calories burned” and “training
progress” must be activated in the SmartBand app in order to view them on
the display of the LED unit.
Fig. 8
Training time Number of steps
Distance
covered (km)
Calories burnedTraining progress
You can view the data of the previous training session again at a later date. Keep
pressing the function button until REC is displayed. The data will be displayed one
after another in a loop after REC.
c) Storage
Your training data is transferred to the SmartBand app when you carry out a sync.
The LED unit stores minute-by-minute information from the last seven days and an
overview of daily training in the last 30 days.
Sync the LED unit regularly so that the SmartBand app displays as many details as
possible.
d) Selecting the display mode
There are various display modes available for training data (g. 9). Press the function
button to switch to the next display mode.
When the display on the LED unit turns o, press the function button once to view
the most recent display mode.
The DAILY, STEP, DIST and CAL display modes must be enabled in the
SmartPhone app in order for them to be displayed on the LED unit.
Fig. 9
Daily values Number of steps
Distance coveredCalories burnedPrevious training data
General
information
General information
In this display mode, general information is automatically displayed in a continuous
loop (g. 11).
MOVE shows the total duration of your training activities for each day. ACTIVE
shows the daily cumulative duration of intensive training activities (e.g. running).
Training progress is shown with symbols which represent a percentage of the set
training goal (g. 10).
Fig. 10
<10 %
10 - 40 %
40 - 70 %
100 %
70 to under 100 %
The MOVE and ACTIVE displays must be enabled in the SmartBand app in
order for them to be displayed on the LED unit.
Fig. 11
Time Training progress Total time (movements) per day
Total time (very active time) per day
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce 1230711 - LED Sport-Armband BT 4.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce 1230711 - LED Sport-Armband BT 4.0 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Renkforce 1230711 - LED Sport-Armband BT 4.0

Renkforce 1230711 - LED Sport-Armband BT 4.0 Gebruiksaanwijzing - Nederlands, Français - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info