656688
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
Operation
Connect a consumer load to the “front socket” (B).
Please consult the section “Technical Data” for the consumer load’s permis-
sible maximum power.
By using the “ON” or “OFF” button for the switching channel, on the handheld trans-
mitter, the radio controlled socket is turned on/off again, using the same set switching
channel (control-LED (A) lights up or turns off).
Maintenance and Care
The product does not require any maintenance and should never be opened or disas-
sembled for any reason.
Remove connected consumer loads from the radio controlled switch socket and re-
move it from the mains socket, before cleaning the product.
Only clean the product with a soft, clean, dry cloth. Never use aggressive cleaning
agents or chemical solutions since these could damage the surface of the casing or
impair operation.
Handling
The radio-controlled switch socket is only intended to be used in dry,
closed indoor locations.
Avoid the following unfavourable environmental conditions at the installa-
tion location and during transportation:
- Direct sunlight
- Extreme cold or heat
- Dust or flammable gases, fumes or solvents
- Strong vibrations
- Strong magnetic fields such as those found in the vicinity of machinery
or loudspeakers
Ensure that the insulation for the entire product is neither damaged nor
destroyed. Never disassemble the product! There are no serviceable
parts inside.
Check the product for damage before each use!
If you recognize damages do no longer use the product!
There is danger to life through an electric shock!
Safe operation must be presumed to be no longer possible:
- the device is visibly damaged
- if the device no longer works
- if the device was stored under unfavourable conditions for a long period
of time
- it has been subjected to considerable stress during transportation
Range
The transmission range of the radio signals, between the handheld transmitter and the
radio controlled switch sockets, is up to 30 m under optimum conditions.
This value, however, is the so-called “open space range” (the range the
transmitter and receiver are visible to each other, without disturbing influ-
ences).
In practical operation, however, there are walls, ceilings of rooms, etc. be-
tween the transmitter and the receiver, which reduce the range accordingly.
Due to the different influences on the wireless transmission, no specific
range can be guaranteed.
However, trouble-free operation is usually possible in a single family house.
Sometimes the range can be considerably reduced due to:
Walls, reinforced concrete ceilings
Coated/metallised insulated glass
Proximity to metallic & conductive objects (e.g., heating elements)
Proximity to human bodies
Broadband interferences, e.g., in residential areas (DECT telephones, mobile
phones, radio controlled headphones, radio controlled speakers, radio controlled
weather stations, baby phones, etc.)
Proximity to electric motors, transformers, power-supply units, computers
Proximity to computers or other electrical devices that are improperly shielded or
operated without any cover
Disposal
Please dispose of the device, when it is no longer of use, according to cur-
rent statutory requirements.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that
this product conforms to the fundamental requirements and the other relevant regula-
tions of the directive 1999/5/EC.
The Declaration of Conformity for this product is available at
www.conrad.com.
Technical Data
Reception frequency ................. 433 MHz
Operating voltage....................... 230 V/AC, 50 Hz
Protection class ......................... I
Input power ................................. 2000 W Ohm resistive load, 300 W inductive load
Address codes............................ 4 (adjustable by turn switch)
Switching channel ..................... Adjustable with turn-switch “1 2 3 4”
LED................................................ lights up, when the mains socket/consumer load is ac-
tivated
Dimensions (H x W x D)............. 95 x 51 x 73 mm (incl. connection plug)
....................................................... approx. 95 x 51 x 35 mm (not including connection plug)
Operating environment ............. only suitable for enclosed, dry indoor locations
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce 1208457 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce 1208457 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info