616921
5
Verklein
Vergroot
Pagina terug
1/95
Pagina verder
98
ENGLISHENGLISH
, Bulb Status Indicator Display (fig. 1-8)
The device is ready to flash when the Bulb Status Indicator Display is illuminated green.
NOTE: if the Flash Button is pressed AND the Skin Contact Sensor is not fully engaged OR the Bulb Status
Indicator Display is not illuminated, an audible “beep” will sound. When the Bulb Status Indicator Display
illuminatesyellow,thereare150ashesremainingintheashbulb.WhentheBulbStatusIndicatorDisplay
ashesyellow,thebulbcartridgehasbeenusedupandwillnolongeroperate.Youmustreplacethebulb
cartridge to continue using the device.
, Treatment Head Release Buttons (fig. 1-14)
Press both buttons and gently pull to remove the treatment head.
F WARNING: ALWAYSensuretheunitisOFFandthepowercordisdisconnectedbeforeremovingthenose
cone.IfthenoseconeisremovedwhiletheunitispoweredON,allindicatorlightsonthebaseunitwillash
and audible beeps” will sound.
C
GETTING ACQUAINTED WITH i-LIGHT
, Long-Life Light Cartridge (fig. 1-15)
Thelong-lifelightcartridgewilldeliver65,000ashesregardlessoftheenergylevelselected.Whileitis
unlikely you will ever need to replace it; it can be replaced by another long-life cartridge SP-6000FQ. Please
contact your local Remington® service centre.
, Energy Level Selection (fig. 1-6)
The i-Light device is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest
setting.
TIP:Forthemosteectiveresults,alwaysusethehighestenergylevelthatdoesnotcausediscomfortonthe
skin. To determine the energy level being used, observe the number of lights illuminated on the Energy
Level Display (fig 1 - 9).
Youri-LightdevicewillautomaticallybesettoEnergyLevel1eachtimethedeviceispoweredON.To
change the level, press the Energy Level Selection Button.
, Test the i-Light device on your skin
1. Review the Warnings and Safety Precautions.
2. Familiarise yourself with the features of the i-Light.
3. Consult the Skin Tone Chart to ensure your skin colour is in the acceptable range (fig. 5).
4. Place the skin of the intended treatment area onto the skin tone sensor - touching the skin tone
sensor (fig. 6).
If your skin is suitable, the appliance will beep and switch on.
Ifyourskinisunsuitable,theappliancewillbuzzandremaino.
5. Test the i-Light device on a small patch of skin and wait 48 hours to ensure there are no adverse
reactions. (fig.7).
Fig. 5
Fig. 6
Fig. 7
, Treat desired area(s) with the i-Light device
Prepare your skin for treatment
1. Ensure the area to be treated is clean and free from oils, deodorants, perfume, make up, lotions and
creams. Shave or trim the hair from the area to be treated (fig 8).
2. Never use wax, epilation, tweezers or depilation products to remove the hair because they counteract
the IPL process.
Prepare the device for treatment
3. Unwrap the hand piece cord from the i-Light base and rest the hand piece in the base cradle. Locate
the power switch on the i-Light base and ensure the unit is OFF. Connect the power cord to the i-Light
base at the power inlet. Connect the power cord to the wall outlet. Turn the power switch ON. (fig. 9)
4. Use the skin sensor to unlock the unit (fig. 6).
Youmustunlocktheunitoneachbodypartyouwishtotreat.
5. Select the desired Energy Level. (fig. 10).
Ifyourskinisunsuitable,theappliancewillbuzzandremaino.
Fig. 8
Fig. 9
Fig. 10
GB
DNLFEIDKSFINPSK
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remington IPL6000F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remington IPL6000F in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info