830711
11
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
11
Front castor
assembly
Check that the screws are properly tightened. Looseness of the
front fork can cause damage, breakage of bolts which can
cause
an accident, check and remove dirt, hair from the front wheel axles
At least once a week
Spokes
Loose spokes can cause deformation of the rear wheels. Contact
your dealer or local bicycle service to manage the pro
blem of
loose spokes.
If the problem occurs
Wheel axles
Check that they are not dirty. Remove all impurities.
If necessary
Push Rims
Check for deformation and wear. They can lead to hand injuries.
If necessary
Brakes
The braking force depends on the tyre pressure. The efficiency of
brake
operation can be also affected with dirt accumulated on
tyres. Keep the brakes clean wiping them with a damp cloth to
remove dirt, and lubricating the funnel of screws, on which the
brake levers turn. Check the brake horizontal position.
At least once a week.
Frame
It is recommended to keep the frame clean to better control wear
At least once a month,
depending on usage
conditions
Front castor
The area between the fork and the front wheel should be kept
clean, because dirt accumulating there can cause
faster wear of
caster bearings. To do so, one should disassemble the front caster
by disassembling it from the fork, to remove all dirt, and then
preserve the metal elements of the wheel (i.e. to apply technical
grease).
At least once a month, if
necessary.
Detachable
elements
Check the condition of detachable elements of the wheelchair; if
screws are loose, they should be tightened.
Once a month.
Most common problems and solutions
If you notice any irregularities in the wheelchair’s functioning, do not use it you should contact your local point of sale
or the service department of the wheelchair supplier. The manufacturer does not warranty correctness of the
wheelchair operation, if non-original parts are used.
Symptoms
Possible cause
What to do?
The wheelchair seems
to tilt on one side
One of the rear tyres might be
inflated more than the other one.
Inflate tyres (4,0-6,5 bar).
Check displacement of the wheelchair mass
The wheelchair is hard
to push
Low air pressure in tyres.
Front wheels axles are dirty.
Too large load applied on the front
turning wheels.
Inflate tyres (4,0-6,5 bar).
Remove dirt.
Balance the weight.
The wheelchair is hard
to turn
Low air pressure in tyres
The front wheels are tied too strong
Front wheels axles are dirty.
Inflate tyres (4,0-6,5 bar).
Check the front wheel axles and loosen them if
necessary.
Remove dirt and clean the front wheels.
Brakes are not
working correctly
Low air pressure in tyres
Inflate tyres (4,0-6,5 bar).
It is hard to fold and
unfold the wheelchair
The upholstery fitted to tight
The frame cross hinge is dirty
Adjust the tension of the upholstery support
belts. Remove the seat cushion.
Clean up and lubricate the crossbar hinge.
The wheelchair is not
stable
Low air pressure in tyres
The elements of wheelchair aren't
rigid and tight
Inflate tyres (4,0-6,5 bar).
Ensure that all screws and nuts are tightened.
Flat tyres
Possible puncture of tube & tyre
Tyre and tube are worn down
Contact your nearest wheelchair dealer or
bicycle service to repair or replace broken tubes
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rehasense Icon 60 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rehasense Icon 60 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info