789167
29
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
29
GB
Checking the battery
Press the button for the battery test (11) to
check the battery condition as indicated by
the LEDs (9).
Charging
Charging at 230 V
Insert the plug from the 230 V adapter into
the charging socket (16) on the energy
station and plug the 230 V adapter into the
mains socket.
While charging the unit, you can press the
button for the battery test (11) so that the
LEDs (9) indicate the jumpstarters battery
level. If the green LED comes on, the
jumpstarter is fully charged.
NB!
The energy station must not be charged
in this way for more than 26 hours at a time.
Charging at 12 V
NB!
Charging with the 12 V adapter is solely
intended as an emergency solution when
there is no access to 230 V.
Insert the plug from the 12 V adapter into the
charging socket (16) on the energy station
and plug the 12 V adapter into the cigarette
lighter socket in a car or boat. The ignition
lock on the car or boat must be in a position
to allow for charging.
While charging the unit, you can press the
button for the battery test (11) so that the
LEDs (9) indicate the jumpstarters battery
level. If the green LED comes on, the
jumpstarter is fully charged.
NB!
The energy station must not be charged
in this way for more than 12 hours at a time.
Use
Jump start
Connect the red battery clamp (6) to the
batterys positive (+) terminal.
Connect the black battery clamp (1) to
a piece of exposed metal in the engine
compartment or to the chassis away from the
battery.
If the battery clamps are correctly attached,
the indicator for reversed polarity (13) lights
green. If you attach the battery clamps in
reverse, and alarm sounds and the indicator
for reversed polarity (13) lights red. Remove
the battery clamps and then connect them
correctly.
Wait a few minutes.
Turn the on/off button (8) to the ON position.
Turn the car or boat ignition key and try to
start the engine for no more than 10 seconds.
If the engine does not start on this attempt,
wait at least 3 minutes before trying again.
Once the engine has started, turn the on/off
knob (8) to the OFF position.
Remove the black battery clamp fi rst and
replace it on the energy station. Then remove
the red battery clamp and replace it on the
energy station.
NB!
The jumpstarter may be used to start
engines if the battery is weak or almost
discharged.
If the engine’s battery is defective or deeply
discharged, the jumpstarter will likely not
start the engine, and the engine battery
instead should be replaced with a new one.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rawlink 68679 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rawlink 68679 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info