587567
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
Troubleshooting
This unit has been designed using state-of-the-art manufacturing processes and it has been tested repeatedly to
ensure that it is working properly. However, should problems occur, refer to the following list.
Unplug the unit from the power supply before performing any work on it!
Problem Possible cause Check Remedy
The unit does not start or
switches itself off automati-
cally.
Power failure.
Are all other electrical compo-
nents working?
Check current and wait for the
device to start again.
Defective power fuse /
main switch is off.
Are all currents for lighting
functional?
Replace power fuse.
Switch on main switch.
Power supply line damaged.
Are all other electrical compo-
nents working?
Maintenance by authorised
personnel.
Temperature range is either
too high or too low.
Is the fan still working?
Keep the unit within operating
temperature range 20 to 35°C.
Water tank is full.
Is the “Tank Full” signal light lit
up?
Empty tank. See page 7.
The surrounding temperature is
outside of the operating range
(16 to 35 °C).
Does “E1“ appear on the dis-
play?
Do not operate the unit out-
side of the operating range.
The exhaust hose is bent, ex-
tended, facing downwards or
blocked.
Does the cooling performance
improve when the device is
operated without an exhaust
hose and without a filter?
Make sure that the exhaust
channel is not blocked.
Dirty filter
Input and/or output opening
blocked by foreign matter.
Are the filters dirty?
Does the cooling performance
improve when the device is
operated without a filter?
Clean filter and reinsert it into
the unit.
Minimum clearance is insuffi-
cient.
Has the minimum distance of
50 cm been maintained?
Maintain minimum distance.
Windows and doors open /
thermal load increased.
Has something been changed
in the design or application?
Close windows and doors /
reduce thermal load.
Low pressure in the setup
room when operating the unit.
Does the cooling performance
improve when a door or win-
dow is opened?
Correct pressure in the setup
room.
“Cooling” operating mode not
set.
Is the “AUTO, HI, MED or LO“
LED lit up in the display?
Set operation mode to “AUTO,
HI, MED or LO“.
Device is switched on with the
timer function.
Is the “AUTO, HI, MED, LO or
FAN“ LED lit up?
Press the I / 0 button again.
Temperature setting too high.
Is the temperature setting
higher than the temperature of
the room?
Lower temperature.
Excess voltage due to light-
ning.
Was there lightning recently in
the region?
Unplug the unit from power
supply with switch 5 and re-
start.
The unit does not to respond
to the infrared remote con-
trol.
Remote-control batteries are
dead or the transmission dis-
tance is too far.
Does the button function work
at a distance of approx. 1 m?
Replace batteries /
reduce distance or change lo-
cation.
Polarity of the batteries is in-
correct after replacement.
Is the polarity correct?
Insert the batteries correctly.
Pay attention to the labels.
Condensation water leaks
out of the device.
The device is not standing up-
right.
Is the device upright?
Place upright and make sure it
is firmly in place.
The plug for the condensation
drain is not inserted correctly
or is damaged.
Is water dripping out of the
condensation drain?
Insert the plug correctly or re-
place if necessary.
The unit is either not cooling
at all or only cooling a little
bit.
Should the unit still not be working despite these checks, please contact an authorised service centre.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO RKL350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO RKL350 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO RKL350

REMKO RKL350 Gebruiksaanwijzing - Nederlands - 16 pagina's

REMKO RKL350 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info