587554
3
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
3
Delivery
All devices are carefully packed
before shipping. Please check the
device immediately after delivery.
Make a note of any damage or
missing parts on the delivery note
and inform the forwarding agent
and your contractual partner. No
warranty can be assumed for later
complaints.
Erecting the device
Make sure that all air intake
and air outlet openings are
free; observe the minimum
clearances (Fig. 2).
Erect the device on a solid,
even foundation (Fig. 3).
Make sure that people and
sensitive objects such as plants
are not directly affected by the
emerging air.
Connect the device to a
properly installed plug socket
(230V/50Hz) (Fig. 5).
Insert the batteries into the
remote control. To do so,
push up the cover on the back
side of the remote control
and insert the batteries while
observing the proper polarity.
Observe the marking inside
the compartment (Fig. 6).
Check whether the plug of the
condensate drain spout has
been provided and whether
it has been properly inserted.
There is otherwise a danger of
water emerging.
Exhaust air conduction
During the operation of the air
conditioner, the device creates
humid exhaust air that must be
conducted outside of the room
so that the cooling effect can be
maintained.
Observe the following notices:
Plug the air outlet hose in-
cluded in delivery onto the air
outlet on the rear panel of the
device.
Lock both catches on the air
outlet into both openings of
the air outlet hose.
Keep the air outlet hose as
short as possible (max. length
1400 mm).
Always lay the air outlet
hose with a constant upward
incline from the device to the
wall/window.
Make sure it has
a wide curve radius (Fig. 7).
The air outlet hose may not be
extended.
Pivot-hung windows
·
Connect
the air outlet hose to
Connect the air outlet hose toConnect
the window jet and the de-
vice.
·
Op
en the window a
nd l
ay
the
at nozzle between the win
dow trim and the window
frame
(Fig. 8)
.
Double-wing window
Lay the fl at nozzle between
the wings, close the window
as far as possible, and secure
the wings with a holding strap
(Fig. 9).
Wall bushing
In case of permanent instal-
lation (s. p. 9, Fig. 19), the
exhaust air from the device is
conducted outside the room
through the wall bushing (Fig.
10).
Device Structure
Fig.
8
Hanging
the window jet
into a pivot-hung
window
Fig.
9
Secure the double-wing
window using a holding strap.
Fig.
10
Permanent installation
with a wall bushing (accessory,
not included in supply schedule)
Fig.
3
Vertical erection on
solid, even foundation
Fig.
4
Five-minute “wait“
Fig.
5
230 V / 50 Hz
Fig.
6
Remote control
6
Remote control
6
Abb.
7
Attach the air outlet
7
Attach the air outlet
7
hose with a constant upward
incline
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO MKT250 S-Line bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO MKT250 S-Line in de taal/talen: Engels als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO MKT250 S-Line

REMKO MKT250 S-Line Gebruiksaanwijzing - Nederlands - 12 pagina's

REMKO MKT250 S-Line Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info