587981
5
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
erant is conducted to an air-cooled
condenser, which condenses the
refrigerant under high pressure as
a result of the heat exchange. The
air emerging from the condenser
heats the environment. Using a
controllable injection valve, the
liquid refrigerant is conducted back
to the evaporator, where the cycle
begins once again.
To regulate the cooling capacity,
a return temperature dependent,
multi-stage regulation is used,
which guarantees autonomous
unit operation in addition to all
safety functions. A floating contact
enables a remote release.
The unit is designed for outdoor
installation. It can also be used in-
doors under certain circumstances.
The cooling circuit of the unit con-
sists of an evaporator, compressor,
thermal injection valve, condenser,
condenser fan, pressure trans-
ducer, and high and low pressure
monitors. According to design, the
medium circuit consists of a plate
heat exchanger, circulation pump,
expansion vessel, safety valve,
differential pressure monitor, and
storage tank.
Accessories include winter fan
The units are provided in a stable
transport packaging. Please check
the units immediately at delivery,
note down any damage or miss-
ing parts on the delivery note, and
inform the shipping agent and your
contracting partner.
We assume no guarantee for later
complaints.
Description of the unit
Transport and packaging
During cooling mode, the unit (air-
cooled chiller) takes up the heat
from the operating medium to be
cooled (water or a water/glycol
mixture) within a closed medium
circuit in the evaporator (flat plate
evaporator) and delivers it to the
closed cooling circuit. As a result
of the heat exchange, the medium
cools and the refrigerant in the
cooling circuit evaporates under
low pressure.
The gaseous refrigerant enters
an electrically driven compressor
(scroll construction), which increas-
es the pressure and temperature of
the refrigerant. The gaseous refrig-
controls, cabled remote controls,
crankcase heaters, vibration damp-
ers, heaters for anti-frost protec-
tion medium, protective grids,
glycol concentrate, and technical
unit handover.
Intended
use
According to design and equip-
ment, the units are intended for
use only as chillers for cooling an
operating medium of water or
a water-glycol mixture within a
closed medium circuit.
Any other use or any use going
beyond this application is consid-
ered improper. The manufacturer/
supplier is not liable for resulting
damage. The user alone bears the
risk.
Intended use also includes the
observance of the operating and
installation instructions, as well as
the maintenance conditions.
Legend:
1 Circulation pump
2 Manual bleeder
3 Flat plate evaporator
4 Differential pressure monitor
5 Diaphragm expansion vessel
6 Safety valve
7 Shut-off valve
8 Victaulic connectors
9 Medium storage tank
10 Free-cooling register
11 Three-way, free-cooling valve
12 Filling/draining valve
13 Medium inlet sensor
14 Medium outlet sensor
15 System return sensor
16 Ambient temperature sensor
Unit setup for medium circuit
KWG
8213
14
3 4
KWG...P
871213
14
3 4
KWG...SP
14
871213
9
12
56
3
4
5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO KWG500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO KWG500 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO KWG500

REMKO KWG500 Gebruiksaanwijzing - Deutsch - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info