685862
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
CHANGING A NOZZLE
1. REMOVING THE NOZZLE RETENTION SCREW
Use your K-Key (K) or a small flat blade screwdriver to remove
the nozzle retention screw (C) by turning counter-clockwise to
remove and clockwise to re-install.
2. PULL UP THE RISER
Insert the K-Key (K) in the keyhole (D) on the top of the nozzle
turret (M) and turn the key ¼ turn to insure that the key does
not slip out of the keyhole when you pull it up. Firmly pull up
the entire spring-loaded riser to access the nozzle socket (N).
Hold the riser assembly with one hand.
3. REMOVING THE NOZZLE
Insert the end of the K-Key (K), hook side up, into the tall slot
along the right side of the nozzle (J) and pull up to pop out the
nozzle. NOTE: Do not put the K-Key or any instrument into the
nozzle opening.
4. INSTALLING A NOZZLE
Press the desired nozzle into the nozzle socket (N). Make sure
the nozzle number is visible and the nozzle “wing” is up.
Then, re-install the nozzle retention screw (C).
NOTE: The nozzle retention screw is also a break-up screw
and used to adjust the distance of the spray.
SETTING THE ARC ADJUSTMENT
1. FINDING THE LEFT START POSITION
Place your finger on the top center of the nozzle turret (M).
Rotate the turret to the right until it stops and then back to
the left until it stops. Notice the position of the nozzle arrow.
This is the “Left Start” (L) position. The sprinkler will begin
spraying from this position and rotate clockwise until it
reaches the right “Arc Stop” (F).
2. ORIENTING THE LEFT START POSITION
Insert the K-Key (K) in the keyhole (D) on the top of the nozzle
turret (M) and turn the key ¼ turn to insure that the key does
not slip out of the keyhole when you pull it up. Being careful
not to allow the nozzle turret to turn, firmly pull up the entire
spring-loaded riser. Hold the lower riser assembly up with
one hand. Now turn only the lower riser (O) clockwise or
counter-clockwise until the nozzle arrow is pointing where
you want the sprinkler to begin spraying.
3. CHANGING THE ARC
Insert K-Key (K) or a flat blade screwdriver into the Arc Set
Adjustment slot (I). Turn clockwise to increase the arc or
counter-clockwise to decrease the arc. NOTE: The arc set
arrow in the center of the nozzle turret rotates to show
the correct setting.
Ra Flow
K L/M M
3
R F
GP
D
A
B
C
Ra Flow
K L/M M
3
R F
GP
I
G
H
30° – 360°
Ra Flow
K L/M M
3
R F
GP
A TURRET TOP
ARC SELECTION:
30° TO 360°
Nozzle
Position
Keyhole
Arc Set
Adjustment
K K-KEY
J NOZZLE
Nozzle
Retention
Screw
MINIPRO
GEAR DRIVEN SPRINKLER SETTING INSTRUCTIONS
NOTE: The MiniPro is factory preset with a 40° arc setting, and includes a pre-installed #1.5 nozzle.
B
C
D
Arc Set
Arrow
Arc’s
Adjustable
Range
E
F
G
Ra Flow
K L/M M
3
R F
GP
Q
R
S
Housing
Can
Sprinkler
Assembly
Twist-Lock
Top
Q
R
S
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw RAINBIRD MiniPro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van RAINBIRD MiniPro in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info