Daily Check List & Safety Information
Items you should check on a daily/ weekly basis:
Your Daily Check lists
1. Visually check the machine for damage. If your tires are pneumatic, check the tire
pressures (30 psi).
IMPORTANT POINT: Inflation of your tires is very important. If they are below the
recommended pressure, it will affect the tire wear, steering and range of the
vehicle.
2. Check that the steering moves freely.
3. Check the tiller clamp is locked.
4. Check that the seat is located correctly and locked into position.
5. Check that the armrests are tight within the width adjustment.
6. Are your batteries fully charged?
7. Are the front and center baskets secured?
8. Do your accelerator and brakes work correctly?
9. Check for full and free movement of the accelerator lever.
Docking Station
10. Check that all the six suction clamps are secured in the car (four floor suction
clamps, two side arm clamps).
11. Check that both front seat supports are secure under the front seats and fully
fastened.
12. Check the ramps are secured into position.
Disposal
• The equipment wrapping is potentially recyclable.
• The metal parts should be used for scrap metal recycling.
• Plastic parts should be used for plastic recycling.
• Electric components and printed circuit boards are to be disposed of as electronic
scrap.
• Faulty or exhausted batteries can be returned to your supplier for disposal.
• All disposals must be carried out in accordance with the respective national legal
provisions. Enquire at your city council regarding local waste management
companies.
Corrosion
All metal parts that are likely to be exposed to the elements are protected from corrosion:
• Metal parts are plated with zinc/ cadmium passivate coating.
• Frame parts have a high impact powder coating.
• Plastic covers are formed in UV-resistant materials.
Important: Possible problems & reporting them to your Service Provider
When reporting a problem, please make sure you have as much information as possible
for the Service Provider (see page 30).
