698700
5
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
8
EN
9
7. Play music
First lower the volume in the App by dragging the slider on the device list to the left. (Attention, in the
submenu “SUMMIT” there is another volume control! This should always be set to 100%, but can also be
set lower if necessary.)
Select one of the inputs on the home side or start a track via USB or UPnP. Now the master and slave
loudspeakers connect to each other via radio transmission. After a short moment the speakers are ready
to play. The loudspeakers do not play simultaneously when starting from standby, as a stable radio
connection must first be established. The radio connection between the loudspeakers is preset so that
you do not have to intend a pairing.
Now you can increase the volume again. The last volume setting before standby is always saved.
8. Use of a preamplifier
You have the possibility to use your AURUM active loudspeakers in a conventional way with a preamplifier.
This enables you to use your usual remote control and feeders.
The first step is to adjust the volume in the app and on the preamplifier. To do this, adjust the preamplifier
to full volume and slowly increase the volume of the speakers with the app until you have reached the
desired maximum volume.
9. Standby
The speakers turn into standby mode after a certain time without signal. The time duration can be set in
the settings. The loudspeakers are designed to remain connected to the mains power supply in standby
mode.
In standby mode, the loudspeakers store the last used analogue input. As soon as the preamplifier has
sent a signal to the loudspeakers, these will automatically wake up from standby mode and play the music
that has been started.
Do not operate the power switches until the speakers are in standby mode. The standby mode can be
initialized immediately by pressing the standby key (4) on the back panal of the master loudspeaker.
STREAMING FUNCTIONS / INPUTS
To be able to use TIDAL®, set your user account in the App under “TIDAL.
Note: A TIDAL® account is required for this function and may occur costs.
You find the internet radio under “Airable” on the main page. You can search for stations directly or have
them sorted by language and genre under “Filter”. Once you have found your favourite station, you can
save it to your favourite list by pressing the arrow to the right of the station name.
USB (stick/ hard disk)
The USB port (10) is located on the back of the master device. Larger hard disks require a separate
power connection. The medium should be formatted in FAT32. MP3, ACC, FLAC, WMA and WAV files are
supported.
UPnP
To use the UPnP function, the speaker must be connected to the same network as the music server. Turn
to “UPnP” in the App and you will find your UPnP server on the new page. Here you can click through the
folder structure you have created and select and play the desired music file. MP3, ACC, FLAC, WMA and
WAV files are supported.
Line In (Analogue Unbalanced)
Stereo chinch connector.
Line In (Analogue Balanced)
Stereo XLR connector.
Pin assignment of the XLR connector: Pin 1= Ground; Pin 2= Signal/Plus; Pin 3= Signal/Minus
TosLink
Optical stereo digital input
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Quadral AURUM active bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Quadral AURUM active in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info